A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Propagation & Plant CareWholesale inquiry

Trolmaster RJ12 Waterproof Straight-Through Inline Coupler

Model / SKU: ECW-1

TrolMaster ECW-1 RJ12 Coupler, IP68 Waterproof

Model
ECW-1
Connector
RJ12 inline, joins two RJ12 cables
Ingress Protection
IP68
Operating Temperature
32-122 F
Source reference priceUSD 19.95

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

TrolMaster ECW-1 RJ12 Coupler, IP68 Waterproof

Product details

  • Sensors and device stations often need to sit beyond the reach of a stock cable.
  • This TrolMaster coupler covers that gap by joining two RJ12 cables into one longer run.
  • The wiring is straight-through, pin to pin, so every signal arrives exactly as it left.
  • Nothing is remapped, and no adapters or custom crimping are needed.
  • The connection sits inside a sealed housing rated IP68.
  • In a grow room, it guards the splice from humidity, condensation and stray irrigation spray.
  • That matters most near reservoirs, under benches and inside dense canopies.
  • TrolMaster dealers list it for Hydro-X, Green-X and Tent-X systems.
  • It also works with standard RJ12 devices and controllers.
  • Each package contains one coupler.
  • The coupler is rated for operating temperatures from 32 to 122 F.
  • Placing an RJ12 Inline Coupler in a Grow Room
  • Plan the cable route before adding a joint, and keep each run as short as practical.
  • Use as few couplers as possible in a single line, since every junction is another point to check.
  • Confirm the controller's maximum cable length before building a very long run.
  • Push each RJ12 plug fully into the coupler until it seats.
  • Check that both ends are fully seated so the seal can do its job.
  • Mount or tie the coupler to a frame or bench so the cables carry no strain.
  • Keep it out of standing water where possible, even though it is waterproof.
  • Label both sides of the joint so the run is easy to trace later.
  • Test the sensor or device reading on the controller once the connection is made.
  • IP68 Waterproof: Sealed against dust, water and condensation.
  • Straight-Through Wiring: Pin-to-pin, with no signal remapping.
  • Joins Two RJ12 Cables: Extends sensor and device runs.
  • TrolMaster Systems: Hydro-X, Green-X and Tent-X.
  • Simple Install: Plug in each cable, no special tools.
  • Technical Specifications

Specifications

Model
ECW-1
Connector
RJ12 inline, joins two RJ12 cables
Ingress Protection
IP68
Operating Temperature
32-122 F
Compatible Systems
TrolMaster Hydro-X, Green-X, Tent-X; standard RJ12 devices
Package
1 coupler

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.