A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Propagation & Plant CareWholesale inquiry

TrolMaster Low-Volt Station (DSV-1)

Model / SKU: DSV-1

This module gives a TrolMaster controller a selectable low-voltage output.

Input
100 to 240 VAC, 50/60 Hz
Package size
85 x 80 x 90 mm
Model
DSV-1
Output, 12 V
0.5 A AC or DC
Source reference priceUSD 78.80

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

This module gives a TrolMaster controller a selectable low-voltage output.

Product details

  • What the TrolMaster DSV-1 Switches
  • It supplies 12 V at up to 0.5 A or 24 V at up to 0.25 A, in either DC or AC.
  • That range covers most irrigation solenoids, small valves and audio or visual alarms.
  • The station plugs into a 100 to 240 VAC outlet and talks to the controller over RJ12.
  • During addressing it is assigned as a temperature, humidity, CO2 or timer device.
  • The controller then switches the output whenever that reading or schedule calls for it.
  • A built-in LCD shows the status at a glance.
  • Pressing and holding the top button overrides the output on or off by hand.
  • It works with Hydro-X and Hydro-X Pro, and TrolMaster also lists Aqua-X use for one linked master pump on 24 V.
  • Putting a Low Volt Station to Work
  • A low volt station fills the gap between a controller's data bus and the small-signal devices around a grow room.
  • A common job is opening a 24 VAC irrigation solenoid on a timer schedule.
  • Another is sounding a strobe or buzzer when temperature or humidity drifts out of range.
  • Assigned to CO2, it can open a low-voltage solenoid on a regulator line.
  • Match AC devices to an AC setting and DC devices to a DC setting.
  • Run the RJ12 cable from the controller, then address the station from its LCD.
  • Test the output with the manual override before trusting it to an automatic program.
  • Mount it indoors, away from spray and drip lines, within 32 to 122 °F.
  • Label each station by its job so the room stays easy to service.
  • Set up this way, it lets one controller handle the low-voltage side of the room as well.
  • Selectable output: 12 or 24 V, in AC or DC.
  • Four control modes: Temperature, humidity, CO2 or timer.
  • Manual override: Hold the top button to force on or off.
  • LCD status: Shows the module state at a glance.
  • Technical Specifications

Specifications

Model
DSV-1
Output, 12 V
0.5 A AC or DC
Output, 24 V
0.25 A AC or DC
Input
100 to 240 VAC, 50/60 Hz
Compatible controllers
Hydro-X, Hydro-X Pro (HCS-1, HCS-2); Aqua-X, one linked master pump on 24 V
Package size
85 x 80 x 90 mm
Selectable output
12 or 24 V, in AC or DC.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.