A CLOSER LOOK
A little more about this product
TrolMaster DCC-2 Puts One Device Under Two Controllers
Product details
- A single exhaust fan often has more than one job in a grow room.
- It may need to clear CO2 when levels run high and also run on a night-time schedule.
- The DCC-2 lets two separate controllers share that one device instead of adding a second fan and module.
- It plugs into one of TrolMaster's plug-in device stations through its built-in RJ12 lead.
- Supported modules are the DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1 and DSV-1.
- Each side of the adapter, Section A and Section B, is addressed to a different controller.
- A typical pairing puts a Hydro-X on one side and a Carbon-X on the other.
- Each side can be registered as a temperature, humidity, CO2 or timer function.
- Once linked, the adapter replaces the module's original preset with the functions you assign.
- The package measures 6.14 × 3.27 × 1.18 in and weighs 0.11 lbs.
- Series or Parallel: Setting the Dual System Control Adapter Interlock
- The interlock setting decides how the two conditions combine.
- With interlock on, both conditions must be true before the device runs, which is a series setup.
- For example, an exhaust fan could run only when CO2 and humidity are both above setpoint.
- With interlock off, either condition can start the device on its own, which is a parallel setup.
- That suits a fan that should run for high CO2 or during a scheduled night-time air exchange.
- Toggling the interlock on either section changes both sections together.
- A quick press of Mode picks the module type, and holding it for three seconds resets the adapter.
- A quick press of Add registers it with the controller, and holding Add for three seconds switches the interlock.
- The reset button does not clear the link on HCS-2 or NFS-2 controllers, so use the controller menu there.
- It is rated for rooms from 32 to 122°F at up to 90% relative humidity.
- Two Controllers, One Module: Address Section A and Section B to separate controllers so both can drive the same device.
- Series or Parallel Interlock: Choose whether both conditions or either condition switches the device on.
- Four Function Types: Register each side as temperature, humidity, CO2 or timer control.
- Built-In RJ12 Lead: Plugs straight into a supported plug-in device station with no extra cable.
- Fewer Duplicate Devices: One fan or dehumidifier can serve two control strategies instead of a second unit.
- Technical Specifications
Specifications
- Compatible modules
- DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1, DSV-1
- Input voltage
- 12 VAC
- Maximum current
- 0.2A
- Operating temperature
- 32–122°F (0–50°C)
- Operating humidity
- ≤90% RH
- Package contents
- 1 × DCC-2 adapter
- Package dimensions
- 6.14 × 3.27 × 1.18 in (156 × 83 × 30 mm)
- Gross weight
- 0.11 lbs (0.05 kg)
- Series or Parallel
- Setting the Dual System Control Adapter Interlock
- Series or Parallel Interlock
- Choose whether both conditions or either condition switches the device on.
- Four Function Types
- Register each side as temperature, humidity, CO2 or timer control.
Questions & discussion
Have a question or something useful to share? Start the conversation.