A CLOSER LOOK
A little more about this product
What the TrolMaster AS-5 Alarm Station Does
Product details
- The AS-5 is an audible and visual alarm for TrolMaster climate and CO2 systems.
- It plugs straight into a Hydro-X Pro (HCS-2) or a Hydro-X Plus (HCS-3), and the Aqua-X Pro (NFS-2) accepts it too.
- There it links to the CDA-1 and follows the AL-1 or AL-2 CO2 sensor channel, or both channels for full redundancy.
- When the controller trips an alarm, the siren sounds at 85 dB and a red strobe flashes 120 times a minute.
- Power arrives through a DC 5.5 x 2.1 mm male connector at 12 or 24 V DC, and the draw is 60 mA.
- The housing measures 82 by 82 by 51 mm, about 3.2 by 3.2 by 2 in, and weighs 3 oz.
- It is rated for 32 to 122 °F at humidity of 90 percent or less.
- The box holds the alarm station alone.
- Placing a Grow Room Alarm Where It Gets Noticed
- A grow room alarm only helps if a person sees or hears it in time to act.
- Inside a flowering room, fans and dehumidifiers can bury a siren, and a closed door muffles it further.
- Many growers mount the station in the hallway or at the room entrance for that reason.
- Anyone walking past then sees the strobe before opening the door.
- In a CO2 enrichment room, the strobe tells staff to wait before walking in.
- Wiring it to both CO2 sensor channels gives a second path if one sensor fails.
- Pick a spot at eye height with a clear line of sight from the corridor.
- Keep it away from irrigation lines, hose bibs and the spray of a cleaning wand.
- Test it after every controller change by pushing a setpoint briefly out of range.
- Then set the limits back and note the test in the room log.
- Teach every person on the team what the red light means and who to call.
- The station signals a problem and leaves the fix to the controller and the crew.
- Power and the alarm signal come from the controller or the DSD-1, so plan that run before mounting.
- Siren and strobe: 85 dB siren with a red strobe at 120 flashes a minute.
- Hydro-X direct: Plugs into the Hydro-X Pro (HCS-2) and Hydro-X Plus (HCS-3).
- Aqua-X Pro: Also works with the NFS-2.
- Carbon-X ready: Powered by the DSD-1; follows the AL-1, AL-2 or both CO2 channels through the CDA-1.
- Low draw: 12 or 24 V DC at 60 mA.
- Compact housing: 82 x 82 x 51 mm, 3 oz.
Specifications
- Model
- AS-5
- Compatible controllers
- Hydro-X Pro (HCS-2), Hydro-X Plus (HCS-3), Aqua-X Pro (NFS-2)
- Carbon-X connection
- Powered by DSD-1, linked to CDA-1 (AL-1, AL-2 or both channels)
- Rated voltage
- 12 V / 24 V DC
- Rated current
- 60 mA
- Input connector
- DC 5.5 x 2.1 mm male
- Product size
- 82 x 82 x 51 mm (3.23 x 3.23 x 2 in)
- Product weight
- 3.00 oz (85 g)
- Package size
- 85 x 80 x 90 mm
- Gross weight
- 4.73 oz (134 g)
Questions & discussion
Have a question or something useful to share? Start the conversation.