A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Propagation & Plant CareWholesale inquiry

Trolmaster 1.5 Digital Flow Meter

Model / SKU: DFM-3

This meter installs inline on a 1.5 in water or nutrient main.

Pipe size
1.5 in
Package size
255 x 135 x 80 mm
Model
DFM-3
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Source reference priceUSD 109.73

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

This meter installs inline on a 1.5 in water or nutrient main.

Product details

  • What the TrolMaster DFM-3 Reads
  • It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
  • A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
  • The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
  • It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
  • With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
  • The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
  • It is rated to 250 psi and works from 32 to 122 °F.
  • The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
  • Placing a 1.5 Inch Flow Meter on a Main Line
  • A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
  • Install it downstream of the pump and filter, before the line branches to the zone valves.
  • Orient it with the direction of flow and support heavy pipe on both sides of the meter.
  • Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
  • Keep the LCD facing the walkway so readings can be checked on every round.
  • Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
  • Enter each zone's target volume and confirm the first totals with a measured fill.
  • A total that climbs on an unchanged program points to a leak worth chasing.
  • A total that falls often means filters or drippers need attention.
  • Flush the pipework before installation so debris does not catch inside the meter.
  • Installed with care, it keeps large rooms on a consistent, measurable feed.
  • 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
  • On-board LCD: Live flow rate and total volume at the pipe.
  • Feed by Volume: Aqua-X Pro doses each cycle by gallons.
  • Technical Specifications

Specifications

Model
DFM-3
Pipe size
1.5 in
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Output
Flow rate and total volume
Compatible controller
Aqua-X Pro (direct or via SPH-1 hub)
Certifications
CE, FCC, ETL
Package size
255 x 135 x 80 mm
Gross weight
1.37 lb
Feed by Volume
Aqua-X Pro doses each cycle by gallons.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.