Lighting AccessoriesWholesale inquiry
ThinkGrow Unit-Strut Hanger for Model-I & Plus
Model / SKU: UH-2
ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus
- Not compatible with
- Model-H, Model-W, Model-V (use UH-1)
- Made for Model-I
- Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount
- Fits standard 1-5/8 in metal framing channel.
Source reference priceUSD 19.00
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut
Product details
- Commercial rooms built on Unistrut often skip ratchet hangers altogether.
- The UH-2 lets a Model-I fixture hang straight from the channel.
- It is made for the ThinkGrow Model-I and Model-I Plus LED fixtures.
- It fits standard 1-5/8 in metal framing channel.
- A quick release design lets the light come down for cleaning or service without loosening the strut hardware.
- Mounting tight to the ceiling leaves more room between the fixture and the canopy.
- That extra headroom helps in low rooms and multi-tier racks.
- It is sold for Model-I rooms where fixtures hang from a strut grid.
- Model-H, Model-W and Model-V fixtures use a different hanger, the UH-1.
- No ceiling channel or anchors are included.
- Installing a Model-I Unistrut Hanger
- Lay out the strut so it lines up with the Model-I hanging points.
- Confirm the channel and anchors are rated for the full fixture weight.
- Attach a UH-2 at each hanging point the fixture manual specifies.
- Raise the fixture and engage the quick release until it locks in place.
- Check that the light is level before connecting power.
- Route power and control cables away from the release mechanism.
- To service the light, open the release and lower the fixture by hand.
- The hanger holds a fixed height, so set canopy distance with dimming or bench height.
- Overhead mounting in commercial rooms is handled by a licensed installer.
- See the ThinkGrow Model-I Plus for a compatible fixture.
- Made for Model-I: Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount: Fits standard 1-5/8 in metal framing channel.
- Quick Release: Lowers the fixture for service without removing strut hardware.
- Low-Ceiling Friendly: Keeps the light close to the ceiling.
- Service Friendly: Quick release makes cleaning and maintenance faster.
- Technical Specifications
Specifications
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus
- Not compatible with
- Model-H, Model-W, Model-V (use UH-1)
- Made for Model-I
- Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount
- Fits standard 1-5/8 in metal framing channel.
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Lighting Accessories
Yield Lab Professional Series Double Ended Grow Light Reflector
Source referenceUSD 64.94
Lighting Accessories
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Source referenceUSD 299.00
Lighting Accessories
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Source referenceUSD 149.95
Questions & discussion
Have a question or something useful to share? Start the conversation.