A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Ventilation & ClimateWholesale inquiry

Ruck 8 Back Draught Dampner

Model / SKU: 149394

How the 8 Inch Back Draught Damper Seals an Idle Duct

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Source reference priceUSD 23.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

How the 8 Inch Back Draught Damper Seals an Idle Duct

Product details

  • Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
  • The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
  • On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
  • Mounting a Backdraft Shutter in the Right Place
  • Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
  • Put it downstream of the fan with the flaps opening the way the air goes.
  • The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
  • Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
  • If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
  • Nudge the speed up a step.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specifications

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.