A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Ventilation & ClimateWholesale inquiry

Ruck 4 Back Draught Dampner

Model / SKU: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Source reference priceUSD 18.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specifications

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.