A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Ventilation & ClimateWholesale inquiry

Ruck 12 Back Draught Dampner

Model / SKU: 149477

How the 12 Inch Back Draught Damper Seals an Idle Duct

Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Source reference priceUSD 39.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

How the 12 Inch Back Draught Damper Seals an Idle Duct

Product details

  • At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
  • The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
  • Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
  • Mounting a Backdraft Shutter in the Right Place
  • Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
  • Install it after the fan, flaps opening downstream.
  • There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
  • Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
  • A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specifications

Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.