A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Lighting AccessoriesWholesale inquiry

Quest 70 Pint - Hanging Bracket Kit

Model / SKU: 4036695

Everything in the Quest 70 Hanging Kit, Item by Item

Bracket dimensions
16.50 x 2.19 x 1.00 in
Bracket shape
L-shaped, cut to hug the unit
Mounting
Eyebolts into structure, not drywall or a suspended grid
Two L-shaped brackets
16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
Source reference priceUSD 133.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Everything in the Quest 70 Hanging Kit, Item by Item

Product details

  • The Quest 70 hanging kit carries five distinct parts.
  • Two brackets, four eyebolts, four cables with carabiners, and a quarter inch clip on 8 ft of nylon rope.
  • That rope and clip are the two pieces most often left off a parts list.
  • They are what the kit uses for the drain line rather than for the unit itself.
  • The brackets are the part worth understanding.
  • They are L-shaped and measure 16.50 by 2.19 by 1.00 in, and they are cut to hug the body of the machine rather than to bolt through it.
  • Two of them take the load and the four cables carry it up to the eyebolts.
  • That is a four point suspension, which is what keeps a dehumidifier level when it is running.
  • Level matters more on a dehumidifier than on a fan.
  • The condensate has to reach the drain.
  • A unit hanging a few degrees out holds water in the pan and eventually pushes it somewhere else.
  • Set the four cables to equal length before the machine goes up, not after.
  • What to Check Before Fitting a Dehumidifier Ceiling Mount
  • Fitment first, because this kit is model specific in a way the part name does not say.
  • It fits the Quest 70, part 4033750, and the Quest 70 50-Hz build, part 4033810, and nothing else.
  • The larger Quest units take a different overhead bracket under its own part number.
  • Second, the structure above the machine.
  • The ceiling has to be verified against the operating weight of the machine.
  • Eyebolts go into structure, never into drywall or a suspended grid, so find the joists first.
  • Third on the list comes the drain.
  • A hanging unit has to gravity-feed its condensate somewhere, and that line needs a continuous fall from the machine to wherever it goes.
  • Work that path out before the eyebolts go in, because moving a drain afterwards means moving the machine.
  • Part 4036695: The part number for this kit specifically.
  • Two L-shaped brackets: 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
  • Four cables with carabiners: A four point suspension, which is what holds the unit level.
  • Four eyebolts: Into structure rather than drywall or a suspended ceiling grid.
  • Clip and 8 ft of nylon rope: Included in the kit, and the piece most often overlooked.
  • Quest 70 only: Parts 4033750 and 4033810; larger units take a different bracket.

Specifications

Bracket shape
L-shaped, cut to hug the unit
Bracket dimensions
16.50 x 2.19 x 1.00 in
Mounting
Eyebolts into structure, not drywall or a suspended grid
Two L-shaped brackets
16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.