A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Hydroponics & IrrigationWholesale inquiry

Netafim Pulse Reed Switch

Model / SKU: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
Source reference priceUSD 70.77

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

Specifications

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.