Hydroponics & IrrigationWholesale inquiry
Netafim PRV 2000 Pressure Regulating Unit, 12 psi Replacement Module
Model / SKU: 31500-001100
Netafim Pressure Regulating Unit, 12 psi
- Model Number
- 32PRVU-12V2K
- Type
- Replacement regulating unit
- Nominal Outlet Pressure
- 12 psi (0.8 bar)
- Sealed Module
- Spring and diaphragm in one piece.
Source reference priceUSD 15.25
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
Netafim Pressure Regulating Unit, 12 psi
Product details
- A Netafim PRV 2000 regulator does its work through sealed modules seated inside the body.
- This 12 psi module is the part that sets and holds the outlet pressure.
- It contains a stainless steel spring and rubber diaphragm in one sealed piece.
- When supply pressure changes, the module responds instantly to keep the outlet steady.
- Netafim recommends 12 psi for thinwall driplines.
- The module fits the 3/4 inch regulator, which uses one unit.
- It also fits the 1-1/2 inch regulator with two units and the 2 inch regulator with four units.
- Replacing the modules restores a regulator that has started to drift.
- It can also convert an existing body to 12 psi when a zone changes to thinwall dripline.
- The regulator body itself is rated for 145 psi at the inlet.
- Netafim lists this module as item 31500-001100, model 32PRVU-12V2K.
- Swapping a Replacement Module in the Field
- Shut off and drain the zone before opening the regulator.
- Remove the cover and lift out the old module.
- Check the seat for grit and wipe it clean.
- Drop the new module into place in the same orientation.
- Replace every module in a multi-unit body so all units match.
- Close the body and restore water slowly.
- Watch the built-in indicator to confirm the outlet has stabilized.
- Check pressure at the end of the longest lateral with a gauge.
- Keep a few spare modules on hand during peak season.
- Store spares in their packaging away from sunlight until needed.
- 12 psi Setting: Recommended for thinwall driplines.
- Sealed Module: Spring and diaphragm in one piece.
- Fits PRV 2000: 3/4 in, 1-1/2 in and 2 in bodies.
- Field Swap: No need to cut the regulator out.
- Convert Zones: Change a body to 12 psi output.
- Technical Specifications
Specifications
- Model Number
- 32PRVU-12V2K
- Type
- Replacement regulating unit
- Nominal Outlet Pressure
- 12 psi (0.8 bar)
- Sealed Module
- Spring and diaphragm in one piece.
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Hydroponics & Irrigation
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
Source referenceUSD 219.95
Hydroponics & Irrigation
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
Source referenceUSD 199.95
Hydroponics & Irrigation
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
Source referenceUSD 189.95
Questions & discussion
Have a question or something useful to share? Start the conversation.