Controllers & MetersWholesale inquiry
Netafim Backflush Controller, 6 Outputs With DP Sensor, 24VAC, With Mounting Bracket
Model / SKU: 00105-006220
Netafim Disc Filter Backflush Controller for Six-Filter Batteries
- Power Source
- 110 VAC 60 Hz or 220 VAC 50 Hz, built-in 24VAC supply
- Dimensions
- 9-1/2 in H x 5-5/8 in L x 3-1/4 in D
- Model
- 31NBCAC6
- Outputs
- 6, 24VAC solenoids
Source reference priceUSD 1,070.77
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
Netafim Disc Filter Backflush Controller for Six-Filter Batteries
Product details
- A long disc filter battery at an irrigation head loads up faster than any one person can watch it.
- Netafim model 31NBCAC6, item 00105-006220, flushes up to six of those filters one after another on 24VAC solenoids.
- A built-in supply converts 110 VAC at 60 Hz or 220 VAC at 50 Hz to the 24 volts the coils need.
- The six outputs come on three plug-in cards, and Netafim's 2-output AC card, model 31NBCACCARD, adds more up to 10.
- Flushing begins when the embedded sensor sees the pressure drop reach its set point, or when the interval timer runs out.
- Netafim also lists the controller for automatic sand media and screen filters.
- Pressure shows in bar or psi, chosen during configuration.
- The set point covers 0.1 to 2.0 bar, which equals 1 to 30 psi.
- A downstream pressure sustaining valve, a delay valve and an alarm can each be given an output.
- The controller weighs 1.3 lb and comes with its mounting bracket.
- Reading the 6 Station 24VAC Flush Controller Display
- The top of the LCD shows actual DP, with the DP set point beneath it.
- Flush time per station sits at the lower left, and the flush mode at the lower right.
- Flush mode reads OFF, a time interval, or dp when only the sensor starts cycles.
- Hold the plus and minus keys together to see the time left until the next flush.
- A dedicated icon appears whenever a cycle has been started by hand from the MANUAL key.
- Three running totals record cycles started by DP, by the timer and by hand.
- Clear any of them with the plus or minus key when starting a new season's log.
- The final configuration screen gives the controller's software version for service calls.
- A blinking P means the low-pressure input has closed and the controller has paused.
- Operation is rated from 32 to 140°F, and the housing stands 9-1/2 in tall.
- Six 24VAC outputs: Three plug-in cards; up to 10 with 31NBCACCARD.
- 110 or 220 VAC supply: Built-in conversion to 24VAC.
- Embedded DP sensor: Set point 0.1-2.0 bar or 1-30 psi.
- Clear LCD readout: Actual DP, set point, flush time and mode on one screen.
- Three cycle counters: Separate totals for DP, timed and manual flushes.
- Mounting bracket: Comes with the controller.
- Technical Specifications
Specifications
- Model
- 31NBCAC6
- Outputs
- 6, 24VAC solenoids
- Power Source
- 110 VAC 60 Hz or 220 VAC 50 Hz, built-in 24VAC supply
- Pressure Units
- Bar or psi
- Optional Outputs
- Main / pressure sustaining valve, delay valve, alarm
- Operating Temperature
- 32-140°F (0-60°C)
- Dimensions
- 9-1/2 in H x 5-5/8 in L x 3-1/4 in D
- Weight
- 1.3 lb
- Three cycle counters
- Separate totals for DP, timed and manual flushes.
- Mounting bracket
- Comes with the controller.
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Controllers & Meters
Yield Lab 8 Outlet 120v/240v Grow Light Relay Controller
Source referenceUSD 89.95
Questions & discussion
Have a question or something useful to share? Start the conversation.