A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Hydroponics & IrrigationWholesale inquiry

Growlink Valve LINK

Model / SKU: GL-LINK-VALVE

Growlink valveLINK Irrigation Controller for Precision Crop Steering

Input Power
24VDC, max 2.7A combined
Dimensions
7.75" × 7.75" × 3.75"
Outputs
8× Sourcing FETs (24VDC valve control)
Valve Compatibility
24VDC solenoids (not 24VAC)
Source reference priceUSD 299.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Growlink valveLINK Irrigation Controller for Precision Crop Steering

Product details

  • The Growlink valveLINK Irrigation Controller drives up to eight independent solenoids or DC valves.
  • Each channel runs through 24VDC sourcing FETs rated 1A per output and 2.7A combined.
  • Each output ties directly into Growlink OS, where Copilot can build crop-steering programs that adjust shot count, duration, and timing per zone.
  • The unit pairs over WiFi for standalone use or connects to a Growlink HUB via the included 10-foot RJ-45 cable for wired installs.
  • Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, suitable for greenhouse and indoor cultivation.
  • Eight-Zone Drip Schedules from a Precision Irrigation Controller
  • Map each channel to one irrigation zone — bench, table, or plant block.
  • The precision irrigation controller fires the matching valve when the Copilot program calls a shot.
  • Place the controller centrally enough that valve runs stay under the FET's 1A current limit per channel.
  • 24V latching solenoids draw more on the pull pulse, so size cable gauge and split high-draw valves across channels.
  • For larger facilities, scale by adding additional valveLINK units to the same Growlink OS account.
  • Channels stay logically grouped under zone names rather than module IDs.
  • Sensor-based mode pairs well with substrate moisture probes.
  • The controller delays the next shot until water content drops past the dryback target, which is core to crop steering.
  • Note 24VAC solenoids aren't compatible — these outputs are DC sourcing FETs, so verify the valve coil type before wiring.
  • 8 Independent Channels (1A Each, 2.7A Combined): Drive up to eight 24VDC irrigation valves on dedicated sourcing FETs sized for typical solenoid duty.
  • Growlink Copilot Crop Steering: Build dryback-aware shot programs that adapt by zone, substrate sensor input, or feeding stage.
  • WiFi Standalone or HUB Wired Mode: Pair to Growlink OS over WiFi for solo setups or plug into a Growlink HUB via the included RJ-45 cable.
  • Flexible Control Modes: Run manual, schedule-based, or sensor-triggered irrigation across all eight channels.
  • Made in the USA: Built for demanding greenhouse and indoor agricultural environments with serviceable construction.
  • Technical Specifications

Specifications

Input Power
24VDC, max 2.7A combined
Outputs
8× Sourcing FETs (24VDC valve control)
Valve Compatibility
24VDC solenoids (not 24VAC)
Connectivity
WiFi (standalone) or RJ-45 to Growlink HUB
Operating Temperature
50–122°F (10–50°C)
Operating Humidity
0–75% RH (non-condensing)
Dimensions
7.75" × 7.75" × 3.75"

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.