A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Propagation & Plant CareWholesale inquiry

Growlink Canopy LINK

Model / SKU: GL-LINK-CANOPY

What the Growlink canopyLINK Consolidates in a Room

Input Power
24VDC, 5W
Low Power Draw
24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
Sensor Inputs
8x M8 ports with auto-addressing
Dimensions
7.75 x 7.75 x 3.75 in
Source reference priceUSD 299.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

What the Growlink canopyLINK Consolidates in a Room

Product details

  • Sensor sprawl is the quiet cost of instrumenting a grow.
  • Every probe wants a channel and every channel wants a port.
  • A controller runs out of inputs long before a room runs out of things worth measuring.
  • This node answers that by taking eight sensors onto a single device.
  • Each one lands on its own M8 port, and addressing happens automatically, so swapping or adding a probe never means configuring a channel by hand.
  • Power is 24VDC at 5W from the included supply, which is a small enough load to run alongside everything else on a bench.
  • Operating range covers 50 to 122 degrees Fahrenheit and up to 75 percent relative humidity, non-condensing.
  • The housing is water resistant, which suits a greenhouse or an indoor room without adding a separate enclosure.
  • Connection to a Growlink HUB runs over the supplied ten-foot RJ-45 cable, or the unit joins over Wi-Fi for a hub-free install.
  • Mixing Probes on a Substrate Sensor Hub
  • Sensor types mix freely across the eight ports.
  • TerraLINK probes read root-zone water content, EC and temperature straight out of the slab or pot.
  • ClimaLINK sensors cover air temperature, humidity and vapour pressure deficit.
  • A PAR sensor on another port captures canopy light intensity for the same node.
  • Third-party instruments speaking SDI-12 land on those same M8 ports, which keeps existing greenhouse hardware in service rather than forcing a wholesale swap.
  • Mount the node close enough to the canopy that no cable ends up under tension.
  • Because addressing is automatic, plug position does not matter and neither does the sequence of installation.
  • Inside Growlink OS the whole assembly registers as one device, which frees regular HUB ports for actuators such as valveLINK and quadLINK.
  • One limit is worth stating plainly.
  • This node reads, it does not switch.
  • Every output decision still runs through Growlink OS or Copilot rules on the wider platform.
  • Eight Auto-Addressing M8 Ports: Substrate, climate and light sensors share any port, with channel assignment handled by the hub.
  • Growlink and SDI-12 Compatible: TerraLINK and ClimaLINK run natively, and compatible third-party SDI-12 instruments work without firmware changes.
  • Wi-Fi or Wired: Pair over Wi-Fi for a hub-free install, or plug into a Growlink HUB with the ten-foot RJ-45 cable.
  • One Device in Growlink OS: The node registers once, which leaves regular HUB ports free for actuators like valveLINK and quadLINK.
  • Water-Resistant Housing: Greenhouse and indoor cultivation conditions are handled without a separate protective enclosure.
  • Low Power Draw: 24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
  • Made in the USA: Domestic manufacture with a mounting kit and power supply included in the box.

Specifications

Input Power
24VDC, 5W
Sensor Inputs
8x M8 ports with auto-addressing
Sensor Compatibility
Growlink TerraLINK / ClimaLINK plus SDI-12
Connectivity
Wi-Fi standalone or RJ-45 to a Growlink HUB
Operating Temperature
50-122 F (10-50 C)
Operating Humidity
0-75% RH, non-condensing
Dimensions
7.75 x 7.75 x 3.75 in
OS Footprint
Registers as a single device in Growlink OS
Low Power Draw
24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.