A CLOSER LOOK
A little more about this product
Growers Choice ROI-E900 Output, Power and Build
Product details
- This 8-bar fixture is rated at 2,340 µmol/s in standard mode and 2,600 µmol/s in boost.
- Efficacy is 2.6 µmol/J, and maximum input is 1,050W.
- The driver autosenses 110–277V, drawing 8.9A at 120V, 5.0A at 208V, 4.5A at 240V and 3.8A at 277V.
- It ships with a NEMA 6-15P plug and a 5-15P adapter for 120V circuits.
- The spectrum is GC-3KF, a 3000K full-phase white with CRI above 86, spread across 2,800 diodes.
- That lets one fixture run from veg to harvest.
- The frame measures 46.9 x 59.5 x 3.2 in and weighs 55 lb.
- Cooling is passive, and the fixture is IP65 rated for -20 to 45°C.
- It carries UL 1598, UL 8800 and DLC listings.
- Running a Commercial LED Grow Light Over a 4x5 Table
- A commercial led grow light this size fits long flower tables better than a square fixture.
- The rectangular frame matches a 4x5 table and stretches to 5x5 ft when hung higher.
- It can sit as close as six inches over the canopy, which helps in rooms with little headroom.
- Center plants tend to finish heavier than the corners, so rotate plants or fill corners with shorter cultivars if uniformity matters.
- The onboard knob dims from 10 to 100 percent, and boost mode adds output late in flower.
- The GC Master Controller, sold separately, links fixtures across a room for schedules and sunrise ramps.
- Start around half power in veg and raise it as the canopy fills in.
- Watch the tops closely at full boost, since bleaching shows up there first.
- Leave open air around the frame so the passive heat sinks can shed heat.
- For a 3x3 or 4x4 tent, a smaller fixture wastes less light on the walls.
- 2,340 µmol/s standard, 2,600 in boost: Enough output for a dense 4x5 flower canopy.
- 2.6 µmol/J: Efficient full-phase output from 2,800 diodes.
- GC-3KF 3000K full phase: One spectrum from veg to harvest, CRI above 86.
- Autosensing 110–277V: Ships with a 6-15P plug and 5-15P adapter.
- 10–100% dimming: Onboard knob or GC Master Controller over 0–10V.
- Technical Specifications
Specifications
- Model
- ROI-E900
- Max Input Power
- 1,050W
- PPF
- 2,340 µmol/s standard; 2,600 µmol/s boost
- Efficacy
- 2.6 µmol/J
- Spectrum
- GC-3KF full phase, 3000K, CRI > 86
- Diodes
- 2,800
- Coverage
- 4 x 5 to 5 x 5 ft
- Minimum Mounting Height
- 6 in above canopy
- Beam Angle
- 120°
- Input Voltage
- 110–277V, 50/60 Hz
- Current
- 8.9A @ 120V, 5.0A @ 208V, 4.5A @ 240V, 3.8A @ 277V
- Dimming
- 10–100%, 0–10V and step dimming
- Dimensions
- 46.9 x 59.5 x 3.2 in
- Weight
- 55 lb
- Operating Temperature
- -20 to 45°C
- Lifespan
- L90 > 54,000 hours
- Certifications
- UL 1598, UL 8800, DLC
Questions & discussion
Have a question or something useful to share? Start the conversation.