Ventilation & ClimateWholesale inquiry
Bluelab PPM Conductivity Pen
Model / SKU: 716482
What the Bluelab PPM Pen Reads, and How Close
- Power
- 1 x AAA alkaline battery
- EC Range
- 0.0 to 10.0 EC, ±0.1 at 25°C
- Temperature Range
- 0 to 50°C / 32 to 122°F, ±1°C
- Temperature Compensation
- Automatic
Source reference priceUSD 99.00
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
What the Bluelab PPM Pen Reads, and How Close
Product details
- Nutrient charts do not agree on units, which is why this pen lets you pick.
- It covers ppm 500 from 0 to 5000, ppm 700 from 0 to 7000 and EC from 0.0 to 10.0.
- Accuracy runs ±50 ppm on the 500 scale, ±70 on the 700 and ±0.1 EC, measured at 25°C.
- Temperature comes along as well, 0 to 50°C or 32 to 122°F, to within a degree.
- Automatic temperature compensation does quiet work behind all of it.
- On an uncompensated meter a cold reservoir reads low and a warm one reads high.
- That gap is wide enough to move a feeding decision.
- This one arrives factory calibrated, so the first reading is a reading rather than a setup job.
- Living With a Conductivity Pen Day to Day
- The care routine is short.
- Rinse it under running water after every use so nutrient salts do not build up on the electrodes.
- Clean the probe properly about every two weeks.
- That is the whole of it, and skipping it is the usual reason a pen starts reading oddly.
- Calibration is optional on a conductivity meter, which is not true of a pH one.
- A bottle of 2.77 EC standard is a check here, not a chore.
- The body is fully waterproof and it floats, which matters more than it sounds when you are leaning over a full tank.
- A backlit screen, a hold function, auto off and a low battery warning cover the rest, on one AAA cell.
- The probe is not replaceable.
- When the electrodes eventually go, the pen goes with them.
- Anyone who would rather change a probe than a meter should look at the OnePen.
- Selectable units: ppm 500, ppm 700 or EC, so it matches whichever scale your nutrient chart uses.
- Reads to ±50 ppm: On the 500 scale, or ±70 on the 700 scale and ±0.1 EC at 25 degrees.
- Automatic temperature compensation: A cold tank reads low on an uncompensated meter.
- This one corrects for it.
- Temperature as well: 0 to 50 degrees Celsius, or 32 to 122 Fahrenheit, to within a degree.
- Factory calibrated: Ready on arrival, and calibration stays optional rather than routine.
- Waterproof and it floats: Useful the first time it goes into a full reservoir by accident.
- Two week cleaning cycle: Rinse after each use, clean the probe properly every couple of weeks.
Specifications
- EC Range
- 0.0 to 10.0 EC, ±0.1 at 25°C
- Temperature Range
- 0 to 50°C / 32 to 122°F, ±1°C
- Temperature Compensation
- Automatic
- Calibration
- Factory calibrated. Optional, using 2.77 EC standard
- Water Resistance
- Fully waterproof, floats
- Power
- 1 x AAA alkaline battery
- Automatic temperature compensation
- A cold tank reads low on an uncompensated meter.
- Temperature as well
- 0 to 50 degrees Celsius, or 32 to 122 Fahrenheit, to within a degree.
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Ventilation & Climate
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Source referenceUSD 149.95
Ventilation & Climate
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Source referenceUSD 139.95
Ventilation & Climate
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Source referenceUSD 119.95
Questions & discussion
Have a question or something useful to share? Start the conversation.