A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Hydroponics & IrrigationWholesale inquiry

AutoPot - easy2Propagate Extension Kit

Model / SKU: APWS212

What the AutoPot easy2Propagate Extension Kit Adds to a System

Dimensions
12 x 26 x 51 in
Type
Extension module, reservoir not included
Compatible reservoir
AutoPot FlexiTank, not included
Weight
27 lb
Source reference priceUSD 283.76

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

What the AutoPot easy2Propagate Extension Kit Adds to a System

Product details

  • The kit is the module without the reservoir.
  • It is for a grower who already runs an AutoPot system and wants a propagation tray hanging off the same FlexiTank.
  • In the box is a 47 by 21.5 in garden tray, the clear lid with four fitted vents, and an AQUAvalve5 with its cover.
  • Then comes the pipework to join it all up.
  • That pipework is 3.3 ft of 3/8 in piping, a 1/2 to 3/8 in tee connector and a 3/8 in tee convertor.
  • The two tees are the point of the kit.
  • One cuts into a 1/2 in main line, the other into a 3/8 in line, so the tray can be spliced into either size of system.
  • Two coco mats, each 23 by 20 by 1.2 in, lie in the base of the tray.
  • A 46 by 20 in root control sheet lies over them, gold face up.
  • The AQUAvalve5 sits in one corner and lets water into the tray only when the mats have drawn it down.
  • Mats hold water and the sheet passes it up into a pot or seed tray by capillary action.
  • Roots stay above the sheet instead of growing through it.
  • The tray should never share a tank with a system that is also feeding established plants.
  • Young plants want a much lighter feed.
  • A dedicated propagation tank, or a tank that is only running propagation trays, is the arrangement it was drawn for.
  • The kit weighs 27 lb and carries part number APWS212.
  • Setting Up a Gravity Fed Propagation Tray
  • A gravity fed propagation tray needs the tank above it and the tray dead level.
  • Both are worth getting right before a single cutting goes in.
  • The AQUAvalve5 cover carries a circular spirit level.
  • Shim the bench until the bubble centres, or one end of the tray floods while the other end dries.
  • Soak the coco mats fully submerged in water adjusted to pH 4.5 for a day or two, then rinse them.
  • Fresh coco carries salts that a seedling does not want to meet.
  • Give the root control sheet half an hour under water as well.
  • Cut a corner out of a mat and the sheet to make room for the valve and its cover.
  • Lay the mat, then the sheet, then the pots or plug trays flat on top so the media touches the sheet.
  • Water each cell once from the top to start the capillary pull.
  • Fill the tray until the mat is about two-thirds under and set the lid on with all four corners seated.
  • Then connect the valve to the tank.

Specifications

Type
Extension module, reservoir not included
Compatible reservoir
AutoPot FlexiTank, not included
Weight
27 lb
Dimensions
12 x 26 x 51 in

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.