Hydroponics & IrrigationWholesale inquiry
AutoPot - easy2Propagate Basic Kit
Model / SKU: APWS213
What the AutoPot easy2Propagate Basic Kit Contains
- Matting preparation
- Soak in pH 4.5 water for 24 - 48 hours, then rinse
- Sheet preparation
- Soak for 30 minutes
- Weight
- 26 lb
Source reference priceUSD 242.36
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
What the AutoPot easy2Propagate Basic Kit Contains
Product details
- Four parts make up the kit.
- A garden tray measuring 47 by 21.5 in is the base.
- A clear lid with four fitted vents sits over it.
- Two pieces of coco matting, each 23 by 20 by 1.2 in, line the tray floor.
- A root control sheet of 46 by 20 in lays over the matting, gold face up.
- The whole kit weighs 26 lb.
- This is the manual-watering version of the easy2Propagate system.
- Water goes into the tray and the matting holds it.
- The root control sheet then wicks that water up to the base of whatever is standing on it.
- Capillary action is doing the watering, which is why the sheet matters as much as the matting does.
- It keeps roots from growing down into the matting and keeps the tray clean enough to use again.
- Pots and seed trays both work on it, provided the base is flat and the media touches the sheet.
- The tray footprint is a bench length rather than a windowsill one, which is what makes this a production tool.
- The kit's part number is APWS213.
- Setting Up a Coco Matting Propagator
- A coco matting propagator wants preparing before anything goes on it.
- AutoPot asks for the matting to be soaked in pH 4.5 water for twenty-four to forty-eight hours, then rinsed.
- After that it runs on pH 5.5 water.
- The root control sheet gets a thirty-minute soak of its own.
- Skip either step and the mat repels water on the first fill.
- Lay the matting in, the sheet on top with the gold face up, then set the pots down.
- Water each cell once from above to start the capillary link between the sheet and the media.
- Then fill the tray until the matting sits about two thirds submerged.
- Fit the lid snugly and leave the vents closed at first.
- The target is 70 to 80 degrees Fahrenheit and at least 80% humidity while roots are forming.
- Open the vents gradually once seedlings or cuttings have rooted.
- Opening them early costs humidity, and opening them late invites rot.
- Rinse the matting and the sheet between runs.
- Both are reusable, and the one thing that ends their life early is salt left to dry in them.
Specifications
- Matting preparation
- Soak in pH 4.5 water for 24 - 48 hours, then rinse
- Sheet preparation
- Soak for 30 minutes
- Weight
- 26 lb
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Hydroponics & Irrigation
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
Source referenceUSD 219.95
Hydroponics & Irrigation
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
Source referenceUSD 199.95
Hydroponics & Irrigation
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
Source referenceUSD 189.95
Questions & discussion
Have a question or something useful to share? Start the conversation.