A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Hydroponics & IrrigationWholesale inquiry

AutoPot - 16Pot System

Model / SKU: APWS16P

Sixteen Plants on the AutoPot 16 Pot System

Power required
None, gravity-fed
Pot size
10.2 in top x 11.8 in tall
Reservoir size, filled
25 in diameter x 31.8 in tall
Model
16Pot System
Source reference priceUSD 836.99

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Sixteen Plants on the AutoPot 16 Pot System

Product details

  • A full grid of sixteen plants runs here from one reservoir, one filter and one pair of taps.
  • Four rows of four trays share a single main line, and every tray has its own AQUAvalve5.
  • Each valve has a 5 mm inlet and opens to fill its tray to about 1 in deep.
  • Then it closes and waits until the plant has taken that solution up.
  • Only an empty tray triggers the next fill, so overwatering is off the table.
  • The fast, thirsty plants just cycle more often than the slow ones.
  • Pots are square, 3.9 gal each, about 10.2 in across the rim and 11.8 in tall.
  • AutoPot plans around four of these modules per square metre, so the full grid covers roughly 4 square metres of floor.
  • Supply comes from a collapsible 60 gal FlexiTank that stands about 25 in wide when full.
  • The tank collapses between runs and goes back together without tools.
  • Laying Out a Commercial Watering System for Sixteen Pots
  • A commercial watering system lives or dies on its plumbing, and this kit keeps it simple.
  • The FlexiTank outlet takes a 1/2 in click-fit tank adaptor with a built-in filter.
  • 26 ft of 1/2 in pipe forms the trunk, passing two inline taps and one 1/2 in tee.
  • Eight 1/2 to 3/8 in crosses branch off that trunk into four rows.
  • A matching length of 3/8 in pipe connects each valve to its cross.
  • Fill the pots with an open, free-draining mix, about half perlite or clay pebbles with coco or soil.
  • Hand-water the transplants, let them drain, then keep the taps closed for a week or so while roots move down.
  • Once the system is running, clean the filter as needed after a weekly look.
  • Refill the FlexiTank when it falls to about a third, and never let it empty.
  • That routine keeps sixteen valves cycling on their own.
  • Sixteen pot sites: Sixteen 3.9 gal square pots, sixteen grommeted trays with lids and sixteen Root Control Discs.
  • Four rows of four: Eight reducing crosses split the main line into four even rows.
  • 60 gal FlexiTank: Collapsible reservoir that packs down between runs and assembles without tools.
  • 1/2 in trunk line: 26 ft of 1/2 in pipe from a click-fit tank adaptor and filter.
  • 26 ft of 3/8 in pipe: Short feeds run from each cross to each AQUAvalve5.
  • Two inline taps: Isolate the tank for refills, filter checks or flushing.
  • No electricity: Gravity and float valves handle every feed, with no pump or timer.

Specifications

Model
16Pot System
Pot volume
3.9 gal (15 L), square
Pot size
10.2 in top x 11.8 in tall
Reservoir size, filled
25 in diameter x 31.8 in tall
Planting density
4 pots per square metre
Minimum tank height
6 in above the highest valve
Power required
None, gravity-fed

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.