A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Propagation & Plant CareWholesale inquiry

Apache Tech LED - White/Red 3:2 - AT200

Model / SKU: AT200

Apache Tech AT200 Build, Draw and Optics

Spectrum
White/Red 3:2
Input
120–240V AC; 2.1A at 110V
Coverage
3 x 3 ft (9 sq ft)
Dimensions
13.5 x 11.0 x 5.0 in
Source reference priceUSD 1,000.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Apache Tech AT200 Build, Draw and Optics

Product details

  • The AT200 is the larger step up in Apache Tech's lineup, using higher-output chips than the smaller 120-series panels.
  • It carries 120 x 3W diodes and draws 226W actual, about 2.1A at 110V.
  • Input is 120–240V AC, so it runs from a normal household outlet.
  • The diodes are split roughly three white to two red, a 3:2 blend that reads as warm white light.
  • That keeps the canopy easy to scout, while the red share supports flowering.
  • Acrylic lenses direct the light at either 14° or 50°, depending on the version you choose.
  • The body measures 13.5 x 11.0 x 5.0 in and weighs about 14.1 lb.
  • Cooling comes from thick finned aluminum heat sinks backed by fans.
  • Coverage is 3 x 3 ft, the footprint a single 600W HID lamp usually lights.
  • How Growers Run an Apache Tech LED Panel Like This
  • This is the Apache Tech LED model sized for a full tent.
  • Hang it between eighteen and thirty inches above the tops, starting high over young plants.
  • Drop it gradually through veg, and watch the upper leaves for bleaching or cupping.
  • The narrow lens pushes light deeper into tall plants, while the wide lens suits trained, flat canopies.
  • It works as the only light in a small tent or as a supplement beside an older HID fixture.
  • Swapping an HID for it cuts heat noticeably, which often lets a small tent drop an exhaust speed.
  • A common question is whether it can cover a 4x4 on a light rail.
  • A mover spreads the footprint, but the corners will still run dimmer than a fixture sized for that tent.
  • The fans are a small trade-off against a fully passive board, since they add a little noise and a part that can wear.
  • 120 high-output 3W chips: Dense chip count concentrates output under a compact panel.
  • 3:2 white-to-red spectrum: White keeps the canopy easy to read while red supports bloom.
  • 14° or 50° acrylic lenses: Pick deep penetration for tall plants or wide spread for flat canopies.
  • Finned heatsink with fans: Keeps the housing cool enough to hang close in a small tent.
  • Household current draw: About two amps on a standard outlet leaves room for fans and filters.
  • Technical Specifications

Specifications

Model
AT200
Spectrum
White/Red 3:2
Input
120–240V AC; 2.1A at 110V
Coverage
3 x 3 ft (9 sq ft)
Hang Height
18–30 in above plants
Dimensions
13.5 x 11.0 x 5.0 in
Weight
14.1 lb
Rated Lifespan
50,000 hours
Certifications
CE, RoHS, UL
Finned heatsink with fans
Keeps the housing cool enough to hang close in a small tent.
Household current draw
About two amps on a standard outlet leaves room for fans and filters.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.