A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Ventilation & ClimateWholesale inquiry

8 inch Backdraft Damper

Model / SKU: VTBDD8

Where an 8 inch Backdraft Damper Earns Its Place

Duct size
Eight inches, which covers most single room extraction runs
Duct diameter
8 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Source reference priceUSD 26.15

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Where an 8 inch Backdraft Damper Earns Its Place

Product details

  • Eight inches is where a lot of single room extraction ends up.
  • It is also the size where backflow starts costing money rather than merely being a nuisance.
  • A duct this diameter moves a serious volume in either direction.
  • With the fan off, an eight inch open run will let cold air, smell and roof dust travel back into a room all night.
  • Sealed rooms lose their pressure relationship the same way.
  • This damper stops that with two galvanized blades hung on independent hinges.
  • Independence is the part to look for in any damper, because a shared shaft turns one stuck blade into two.
  • The whole assembly inserts into the duct, so there is no flange, no adaptor and no transition piece.
  • It installs in any orientation, which matters on a vertical riser as much as on a horizontal run.
  • The Neoprene Gasket and What a Bad Seal Costs
  • The blades close onto a neoprene perimeter gasket rather than onto bare steel.
  • That choice does two jobs at once.
  • It takes the clang out of a closure, which is a real consideration in a building where people sleep or work nearby.
  • It also fills the gap that a metal edge always leaves.
  • On a duct this size a thin gap around the circumference adds up to a meaningful leak.
  • Keep the gasket in mind through the life of the installation.
  • Dust builds on the sealing face, resin from a room carries into the duct, and a face that cannot seat cleanly leaks quietly for months.
  • Wipe it when the filter is serviced.
  • Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
  • Any reasonably specified eight inch fan exceeds that at full speed.
  • Check it at the lowest speed the fan will actually be run, not at full.
  • Duct size: Eight inches, which covers most single room extraction runs
  • Function: Prevents backflow of cold air, odour and dust when the fan stops
  • Blades: Two galvanized blades, each on an independent hinge
  • Seal: Neoprene perimeter gasket, not a bare metal edge
  • Noise: The gasket takes the clang out of every closure
  • Leakage: A gasketed face closes the gap a metal edge always leaves
  • Mounting: The assembly inserts into the duct with no flange needed

Specifications

Duct diameter
8 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Eight inches, which covers most single room extraction runs
Noise
The gasket takes the clang out of every closure

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.