Ventilation & ClimateWholesale inquiry
4 inch Backdraft Damper
Model / SKU: VTBDD4
What a 4 inch Backdraft Damper Is Stopping
- Duct size
- Four inches, matching a four inch inline fan or run
- Duct diameter
- 4 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
Source reference priceUSD 23.98
For comparison only. Request your current wholesale price, availability and delivery terms.
No payment required. A conversation about what you need.
Factory-direct support15+ years of experience
A CLOSER LOOK
A little more about this product
What a 4 inch Backdraft Damper Is Stopping
Product details
- A duct with nothing in it is a two way street.
- When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
- On a sealed room it also breaks the pressure relationship you built the extraction around.
- A backdraft damper closes that street in one direction.
- Two blades sit inside the body, each on its own independent hinge.
- That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
- The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
- It installs in any orientation.
- The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
- Why Static Pressure Decides Whether It Opens at All
- One figure matters more on a small duct than anywhere else.
- The blades need between four and eight hundredths of an inch of static pressure before they lift.
- That is not very much pressure at all.
- A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
- The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
- Two habits between them avoid it entirely.
- Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
- Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
- A unit that will be run at thirty percent overnight needs to open at thirty percent.
- The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
- Duct size: Four inches, matching a four inch inline fan or run
- Function: Stops air travelling back down the duct when the fan is off
- Blades: Two, each on an independent hinge so neither can jam the other
- Seal: A neoprene perimeter gasket rather than metal onto metal
- Noise: That gasket is what makes the closure quiet as well as tight
- Body: Galvanized steel throughout the housing and both blades
- Mounting: The whole assembly inserts into the duct, with no flange to fit
- Orientation: Installs in any position
Specifications
- Duct diameter
- 4 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
- Mounting
- The whole assembly inserts into the duct
- Opening pressure
- 0.04 to 0.08 in of static pressure
- Duct size
- Four inches, matching a four inch inline fan or run
- Noise
- That gasket is what makes the closure quiet as well as tight
Let’s make it work for your project
Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.
KEEP EXPLORING
View all productsMore possibilities for your space
Ventilation & Climate
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Source referenceUSD 149.95
Ventilation & Climate
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Source referenceUSD 139.95
Ventilation & Climate
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Source referenceUSD 119.95
Questions & discussion
Have a question or something useful to share? Start the conversation.