Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Kontrolery i miernikiZapytanie hurtowe

TrolMaster Sensor Bracket (2-pack)

Model / SKU: TSB-1

How the TrolMaster TSB-1 Holds a Sensor

Package size
85 x 68 x 67 mm
Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Cena referencyjna źródłaPLN 63.72

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

How the TrolMaster TSB-1 Holds a Sensor

Product details

  • This set contains two holders that work together to mount one sensor.
  • TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
  • Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
  • Each holder fixes flat to a wall or post.
  • Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
  • The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
  • That matters because a swinging sensor reads the air in a different spot from one minute to the next.
  • The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
  • The pack ships in a box about 85 x 68 x 67 mm.
  • Placing a Sensor Mounting Bracket for Accurate Readings
  • A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
  • TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
  • The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
  • Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
  • Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
  • Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
  • Seat the sensor and route its cable along the wall so it does not pull on the housing.
  • Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
  • In larger rooms, a set for each sensor keeps every reading consistent.
  • Wipe dust off the sensor during routine cleaning.
  • Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
  • Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
  • Two holders per pack: Together they mount one sensor.
  • Curved locking edges: Hold the sensor firmly in place.
  • Joinable design: Holders link with a mortise-and-tenon joint.
  • Technical Specifications

Specyfikacje

Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Mounting
Wall mount, joinable holders
Package size
85 x 68 x 67 mm

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.