Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Trolmaster 1.5 Digital Flow Meter

Model / SKU: DFM-3

This meter installs inline on a 1.5 in water or nutrient main.

Pipe size
1.5 in
Package size
255 x 135 x 80 mm
Model
DFM-3
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Cena referencyjna źródłaPLN 438.08

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

This meter installs inline on a 1.5 in water or nutrient main.

Product details

  • What the TrolMaster DFM-3 Reads
  • It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
  • A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
  • The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
  • It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
  • With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
  • The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
  • It is rated to 250 psi and works from 32 to 122 °F.
  • The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
  • Placing a 1.5 Inch Flow Meter on a Main Line
  • A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
  • Install it downstream of the pump and filter, before the line branches to the zone valves.
  • Orient it with the direction of flow and support heavy pipe on both sides of the meter.
  • Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
  • Keep the LCD facing the walkway so readings can be checked on every round.
  • Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
  • Enter each zone's target volume and confirm the first totals with a measured fill.
  • A total that climbs on an unchanged program points to a leak worth chasing.
  • A total that falls often means filters or drippers need attention.
  • Flush the pipework before installation so debris does not catch inside the meter.
  • Installed with care, it keeps large rooms on a consistent, measurable feed.
  • 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
  • On-board LCD: Live flow rate and total volume at the pipe.
  • Feed by Volume: Aqua-X Pro doses each cycle by gallons.
  • Technical Specifications

Specyfikacje

Model
DFM-3
Pipe size
1.5 in
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Output
Flow rate and total volume
Compatible controller
Aqua-X Pro (direct or via SPH-1 hub)
Certifications
CE, FCC, ETL
Package size
255 x 135 x 80 mm
Gross weight
1.37 lb
Feed by Volume
Aqua-X Pro doses each cycle by gallons.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.