Ta treść jest obecnie dostępna w oryginalnym języku.
Akcesoria oświetlenioweZapytanie hurtowe
Sero Bus Cable, 6 ft
Model / SKU: 705145
Sero 6 ft Bus Cable for Cabinet and Rack Runs
- Type
- System bus cable
- Length
- 6 ft
- Compatibility
- Sero System
Cena referencyjna źródłaPLN 68.31
Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.
Brak opłat. Rozmowa o tym, czego potrzebujesz.
Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE
Trochę więcej o tym produkcie
Sero 6 ft Bus Cable for Cabinet and Rack Runs
Product details
- Some components cannot share the same board as the controller.
- A module might mount on the far side of a cabinet, under a bench or one level up a rack.
- This Sero cable reaches those spots at 6 feet long.
- It has enough length to follow a corner or drop down a rack without stretching.
- The cable carries the system bus from one component to the next.
- That keeps every unit in the same network, even when they are spread out.
- Sero states that only its approved bus cables should connect system components.
- Sticking with the matched cable keeps the connection within the system design.
- Each cable links a single pair of units.
- Measure along the route the cable will follow, including any bends.
- A length that runs slightly long is easier to manage than one that ends short.
- Running a Data Cable Neatly Through a Cabinet
- Cut power to the system before working on any connection.
- Plan the path along the inside walls of the cabinet or rack.
- Secure the cable with clips or soft ties at regular spacing.
- Leave a gentle loop at each end so the connector carries no weight.
- Coil any spare length loosely and fasten it out of the way.
- Avoid tight bends, which can stress the conductors inside.
- Keep the run clear of fans, moving doors and drawer slides.
- Separate it from power cords and lighting wiring where space allows.
- Label each end to match the component it serves.
- Bring power back on and confirm that every unit shows up on the controller.
- Recheck the clips and loops during routine maintenance.
- 6 ft Length: Spans cabinets, benches and racks.
- Follows Corners: Room to route around obstacles.
- Sero Approved: Matched to Sero System components.
- Keeps One Network: Links spread-out units together.
- One Link per Gap: Connects one unit to the next.
Specyfikacje
- Type
- System bus cable
- Length
- 6 ft
- Compatibility
- Sero System
Sprawmy, żeby to zadziałało w Twoim projekcie
W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.
Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.
KONTYNUUJ ODKRYWANIE
Zobacz wszystkie produktyWięcej możliwości dla Twojej przestrzeni
Akcesoria oświetleniowe
Yield Lab Professional Series Double Ended Grow Light Reflector
Odniesienie do źródłaPLN 259.26
Akcesoria oświetleniowe
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Odniesienie do źródłaPLN 1,193.71
Akcesoria oświetleniowe
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Odniesienie do źródłaPLN 598.65
Pytania i dyskusja
Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.