Ta treść jest obecnie dostępna w oryginalnym języku.
Akcesoria oświetlenioweZapytanie hurtowe
Sero Bus Cable, 10 ft
Model / SKU: 705150
Sero 10 ft Bus Cable for Room-Side Components
- Type
- System bus cable
- Length
- 10 ft
- Compatibility
- Sero System
Cena referencyjna źródłaPLN 68.31
Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.
Brak opłat. Rozmowa o tym, czego potrzebujesz.
Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE
Trochę więcej o tym produkcie
Sero 10 ft Bus Cable for Room-Side Components
Product details
- In many grow rooms the controller hangs by the door while the gear it manages sits deeper inside.
- A module near a bench or on the next wall needs a longer link.
- This Sero cable spans that distance at 10 feet.
- It carries the system bus from the controller or one module to the next unit.
- That lets the controller stay where it is easy to read and reach.
- The components can then sit close to the equipment they work with.
- Sero states that only its approved bus cables should connect system components.
- A matched cable keeps the bus connection within the system design.
- Each cable joins one component to one other.
- Map the route along walls or ceiling supports before choosing a length.
- Include any rise or drop along the way in that measurement.
- Laying Out a Sero Controller Network in a Room
- Turn off power to the system before plugging in or unplugging any bus cable.
- Run the cable high along walls or supports, away from foot traffic and spills.
- Fasten it with clips or soft ties at regular spacing.
- Leave a small slack loop near each connector so tension stays off the plug.
- Keep it clear of lights, ballasts and heaters.
- Cross power wiring at right angles rather than running alongside it.
- Protect the cable with conduit or a cover where it crosses a doorway or walkway.
- Label both ends so each module can be traced quickly.
- Restore power and confirm the controller recognizes every connected unit.
- Walk the run during regular maintenance and look for chafing or loose ties.
- Replace any cable with a cut jacket or damaged connector.
- 10 ft Length: Reaches across part of a room.
- Flexible Layout: Controller stays near the door.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Clean Routing: Runs along walls and supports.
Specyfikacje
- Type
- System bus cable
- Length
- 10 ft
- Compatibility
- Sero System
Sprawmy, żeby to zadziałało w Twoim projekcie
W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.
Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.
KONTYNUUJ ODKRYWANIE
Zobacz wszystkie produktyWięcej możliwości dla Twojej przestrzeni
Akcesoria oświetleniowe
Yield Lab Professional Series Double Ended Grow Light Reflector
Odniesienie do źródłaPLN 259.26
Akcesoria oświetleniowe
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Odniesienie do źródłaPLN 1,193.71
Akcesoria oświetleniowe
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Odniesienie do źródłaPLN 598.65
Pytania i dyskusja
Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.