Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

Ruck 8 Back Draught Dampner

Model / SKU: 149394

How the 8 Inch Back Draught Damper Seals an Idle Duct

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Cena referencyjna źródłaPLN 91.82

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

How the 8 Inch Back Draught Damper Seals an Idle Duct

Product details

  • Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
  • The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
  • On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
  • Mounting a Backdraft Shutter in the Right Place
  • Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
  • Put it downstream of the fan with the flaps opening the way the air goes.
  • The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
  • Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
  • If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
  • Nudge the speed up a step.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specyfikacje

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.