Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

Ruck 4 Back Draught Dampner

Model / SKU: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Cena referencyjna źródłaPLN 71.86

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specyfikacje

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.