Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

Ruck 12 Back Draught Dampner

Model / SKU: 149477

How the 12 Inch Back Draught Damper Seals an Idle Duct

Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Cena referencyjna źródłaPLN 155.70

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

How the 12 Inch Back Draught Damper Seals an Idle Duct

Product details

  • At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
  • The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
  • Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
  • Mounting a Backdraft Shutter in the Right Place
  • Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
  • Install it after the fan, flaps opening downstream.
  • There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
  • Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
  • A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specyfikacje

Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.