Ta treść jest obecnie dostępna w oryginalnym języku.
Wentylacja i klimatZapytanie hurtowe
Quest Overhead Dehumidifier Hanging Bracket
Model / SKU: 4036668
Quest Overhead Dehumidifier Hanging Bracket
- Compatible models
- Quest Dual 105, 155, 165, 205, 215, 225
- Quantity
- 1 bracket per package
- Fits Six Dual Models
- Dual 105, 155, 165, 205, 215 and 225.
Cena referencyjna źródłaPLN 156.02
Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.
Brak opłat. Rozmowa o tym, czego potrzebujesz.
Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE
Trochę więcej o tym produkcie
Quest Overhead Dehumidifier Hanging Bracket
Product details
- This is Quest's factory bracket for hanging a Quest Dual dehumidifier overhead instead of setting it on the floor.
- It fits the Dual 105, 155, 165, 205, 215 and 225.
- Each package holds one bracket, and every dehumidifier needs two.
- The brackets fasten to the cabinet with the mounting screws provided.
- Once both are on, the unit hangs from them on chain or threaded rod tied into the ceiling structure.
- Getting a dehumidifier off the floor frees space for benches, walkways and carts.
- It also keeps the cabinet clear of floor-level water, spills and washdowns.
- A hung unit stays out of the way of foot traffic and carts during harvest.
- The part number is 4036668.
- Using the factory bracket keeps the load on the points Quest designed for it.
- Installing a Dehumidifier Hanger Safely
- A dehumidifier hanger only works if the ceiling structure can carry the load.
- Quest Dual units are heavy, so anchor into joists, trusses or strut channel rather than drywall.
- Fit both brackets to the cabinet on the floor, then lift the unit into place with a helper or a lift.
- Use chain or threaded rod rated well above the unit's weight, and keep the hangers vertical.
- Level the cabinet so the condensate drains toward the outlet instead of pooling.
- Plan the drain line or condensate pump before the unit goes up, since access gets harder once it hangs.
- Leave room around the filter door so the filter can still slide out for cleaning.
- Keep the discharge clear of lights and duct runs so dry air reaches the canopy.
- Hang the unit where its cord reaches the outlet without an extension.
- Check the hardware every few months for loosened nuts or stretched links.
- Factory Quest Part: Made for the Quest Dual cabinet and its mounting points.
- Fits Six Dual Models: Dual 105, 155, 165, 205, 215 and 225.
- Two Per Unit: One bracket per package; each dehumidifier uses two.
- Screws Included: Mounting screws attach the bracket to the cabinet.
- Frees Floor Space: Lifts the unit above benches, walkways and floor water.
- Technical Specifications
Specyfikacje
- Compatible models
- Quest Dual 105, 155, 165, 205, 215, 225
- Quantity
- 1 bracket per package
- Fits Six Dual Models
- Dual 105, 155, 165, 205, 215 and 225.
Sprawmy, żeby to zadziałało w Twoim projekcie
W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.
Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.
KONTYNUUJ ODKRYWANIE
Zobacz wszystkie produktyWięcej możliwości dla Twojej przestrzeni
Wentylacja i klimat
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Odniesienie do źródłaPLN 598.65
Wentylacja i klimat
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Odniesienie do źródłaPLN 558.73
Wentylacja i klimat
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Odniesienie do źródłaPLN 478.88
Wentylacja i klimat
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Odniesienie do źródłaPLN 758.34
Pytania i dyskusja
Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.