Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

Quest Duct Kit (Hi-E 195)

Model / SKU: 4039132

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Cena referencyjna źródłaPLN 738.58

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Product details

  • This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
  • A duct cover plate blocks off the opening the ducted setup no longer uses.
  • Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
  • Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
  • The installation sheet for the kit is TS-1059, written for the Hi-E series.
  • The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
  • Nothing else is needed from the dehumidifier side.
  • Flex or rigid duct in matching sizes completes the run.
  • Why Growers Fit a Dehumidifier Duct Kit
  • A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
  • That keeps its heat and noise out of the room and frees floor space for plants.
  • Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
  • Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
  • Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
  • Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
  • Plan the drain line at the same time, since a remote unit still needs a path for condensate.
  • The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
  • 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
  • Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
  • Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
  • Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
  • Technical Specifications

Specyfikacje

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.