Ta treść jest obecnie dostępna w oryginalnym języku.
Wentylacja i klimatZapytanie hurtowe
Quest 335 Duct Kit
Model / SKU: 4042685
What the Quest 335 Duct Kit Includes
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Cena referencyjna źródłaPLN 1,696.74
Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.
Brak opłat. Rozmowa o tym, czego potrzebujesz.
Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE
Trochę więcej o tym produkcie
What the Quest 335 Duct Kit Includes
Product details
- This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
- In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
- Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
- Both connections take 16 in round duct.
- Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
- It also fits the 50 Hz Quest 375 (4046200-NC).
- The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
- That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
- Planning a Run With a Dehumidifier Duct Kit
- A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
- Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
- Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
- Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
- Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
- Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
- Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
- Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
- Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
- 16 in connections: Round duct on both intake and discharge.
- Complete hardware: Adapters, plenum, screws and drill bit included.
- Factory fit: Quest part 4042685 for the Quest 335 cabinet.
- Remote mounting: Run the unit from a mechanical room or ceiling.
- Technical Specifications
Specyfikacje
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Sprawmy, żeby to zadziałało w Twoim projekcie
W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.
Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.
KONTYNUUJ ODKRYWANIE
Zobacz wszystkie produktyWięcej możliwości dla Twojej przestrzeni
Wentylacja i klimat
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Odniesienie do źródłaPLN 598.65
Wentylacja i klimat
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Odniesienie do źródłaPLN 558.73
Wentylacja i klimat
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Odniesienie do źródłaPLN 478.88
Wentylacja i klimat
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Odniesienie do źródłaPLN 758.34
Pytania i dyskusja
Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.