Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Hydroponika i nawadnianieZapytanie hurtowe

Netafim Pulse Reed Switch

Model / SKU: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
Cena referencyjna źródłaPLN 282.54

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

Specyfikacje

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.