Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Hydroponika i nawadnianieZapytanie hurtowe

Netafim MegaStand Supporting Arm for Riser

Model / SKU: 64520-002485

Netafim MegaStand Supporting Arm for Riser

Connection to Base
Press button
Compatible Stand
Netafim MegaStand (base 64520-002480, riser 64520-002490)
Material
100% plastic, acid and corrosion resistant
Cena referencyjna źródłaPLN 11.86

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Netafim MegaStand Supporting Arm for Riser

Product details

  • A sprinkler that leans throws water unevenly, and a tall riser on soft ground leans easily.
  • The supporting arm is the MegaStand part that stops that from happening.
  • It is one of three components in Netafim's MegaStand, along with the base and the riser.
  • The base clips onto two inch FlexNet layflat pipe and gives the stand a wide footprint.
  • The arm connects to the base with a press button and holds the riser steady above it.
  • Netafim says the MegaStand runs sprinklers with high stability and verticality thanks to its wide, sturdy base.
  • The arm is what carries that stability up to the riser.
  • Netafim lists the arm as catalog number 64520-002485.
  • Like the rest of the stand, it is made of 100 percent plastic.
  • Netafim rates the material as resistant to acids and corrosive agents.
  • Nothing needs to be bolted or tightened, since the whole stand goes together by hand.
  • The arm can stay clipped on between moves or come off for storage.
  • Netafim packs the arm 50 to a box.
  • Building a Stable Sprinkler Stand in the Field
  • Lay out the FlexNet pipe first and mark where each stand will sit.
  • Clip a MegaStand base onto the pipe at each position.
  • Press the supporting arm onto the base until the button locks it in place.
  • Thread the riser into the stand and let the arm brace it.
  • Thread a 1/2 inch sprinkler into the top of the riser.
  • Check that the head stands plumb from two directions before turning on the water.
  • Netafim offers sprinkler heights of 0.5 m with one riser or 1.0 m with two.
  • The taller setup puts more leverage on the joint, which is where the arm earns its place.
  • Pressurize the line slowly so the stands settle without tipping.
  • Walk the line and correct any stand that has shifted on uneven ground.
  • At the end of the season, press the button to release the arm and stack the parts for storage.
  • Store the arms out of direct sun when they are not in use.
  • Keep a few spare arms with the field kit for quick replacements.
  • Riser Brace: Keeps the riser and sprinkler upright.

Specyfikacje

Connection to Base
Press button
Compatible Stand
Netafim MegaStand (base 64520-002480, riser 64520-002490)
Material
100% plastic, acid and corrosion resistant

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.