Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Hydroponika i nawadnianieZapytanie hurtowe

Netafim 3/4in Insert Coupling with Rings - 100 Pack

Model / SKU: 32500-021530

Netafim 3/4in Insert Coupling with Rings

Nominal Size
3/4 inch
Fitting Type
Straight coupling, barb x barb
Pipe Inside Diameter
22 mm
Pipe Wall Thickness
1.5 mm
Cena referencyjna źródłaPLN 369.77

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Netafim 3/4in Insert Coupling with Rings

Product details

  • Supply pipe and heavy wall dripline both get cut, extended and rerouted over the life of a system.
  • This straight insert fitting joins two pieces end to end so the run carries on as one line.
  • Each half of the coupling carries a series of raised rings.
  • Those rings are the barb, and each one bites into the inside of the pipe as it slides on.
  • Several rings in a row give the joint more grip than a single ridge.
  • Its brown color and part number match the 25 mm barb coupling in Netafim's connector catalog.
  • Netafim lists that size for pipe with a 22 mm inside diameter and a 1.5 mm wall.
  • Netafim describes the barb connector body as a UV and chemical resistant polymer.
  • That matters on exposed runs and in lines that carry fertilizer.
  • The fitting is a single molded piece with no nuts, sleeves or loose seals.
  • Installation takes a sharp cutter and hand pressure, nothing more.
  • A bag of 100 covers a full season of repairs and new lateral work across a large site.
  • Making a Barbed Pipe Coupling Hold
  • Turn the zone off and drain the pressure before cutting the line.
  • Cut out any damaged section and square both pipe ends.
  • A clean, straight cut lets the pipe seat evenly over all the rings.
  • Check the pipe size against the fitting before pushing it on.
  • Warm stiff pipe in the sun or in warm water so it stretches over the rings more easily.
  • Push one pipe end onto the coupling with a slight twisting motion until it covers every ring.
  • Repeat on the other side so both pipes meet near the middle.
  • Do not use oil or soap on the barbs.
  • A dry fit grips better.
  • Turn the zone on slowly and watch both joints at working pressure.
  • A small leak usually means the pipe did not slide fully over the last ring.
  • On buried or exposed pipe, keep the joint straight and out of tension so the pipe does not pull back off.
  • Flush the line after a repair to clear out soil and pipe shavings.
  • Store spare couplings in their bag, away from sun, until they are needed.
  • Ringed Barbs: Multiple raised rings grip the inside of the pipe.

Specyfikacje

Fitting Type
Straight coupling, barb x barb
Nominal Size
3/4 inch
Pipe Inside Diameter
22 mm
Pipe Wall Thickness
1.5 mm
Color
Brown
Material
UV and chemical resistant polymer
Pack Quantity
100

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.