Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Hydroponika i nawadnianieZapytanie hurtowe

HydroLogic Evolution Wall Mount Bracket · Stainless, RO1000

Model / SKU: 741585

What the Evolution Wall Mount Bracket Holds

Dimensions
11.375 W x 4.25 H x 6.1875 D in
Material
Stainless steel, heavy duty
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight
Cena referencyjna źródłaPLN 367.13

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

What the Evolution Wall Mount Bracket Holds

Product details

  • A filter stack, off the floor.
  • It measures 11.375 by 4.25 by 6.1875 in and weighs 1.122 lbs.
  • It replaces the older HL 10057 part.
  • Why Heavy Duty Stainless Suits the Wall Behind an RO Unit
  • That wall gets wet and stays wet.
  • Plated steel rusts there, which is the whole reason for the material choice.
  • The more important number is not the bracket though.
  • It is what the bracket is screwed into.
  • Full of water an Evolution stack weighs far more than the bracket does.
  • The fixing carries the job: find studs, or use anchors rated well past the loaded weight.
  • Screws and washers come in the box, which is worth knowing because the ones most people reach for are plated.
  • Wall anchors are not included, since the right anchor depends on what you are drilling into.
  • HydroLogic describes the part as mounting an Evolution-RO to a variety of surfaces rather than naming one model.
  • It is not tied to the RO1000 alone.
  • Gets the system off the floor: Wall mounted, which is usually where an RO stack belongs.
  • Heavy duty stainless: The wall behind an RO unit stays wet.
  • Plated steel does not last.
  • Screws and washers included: The fasteners most people would otherwise grab are plated steel.
  • Replaces HL 10057: The older bracket part number, superseded by this one.
  • Not RO1000 only: HydroLogic describes it as mounting an Evolution-RO generally.
  • Anchors are not included: The right anchor depends on the wall, so that choice is yours.
  • Dimensions: 11.375 by 4.25 by 6.1875 in.
  • Technical Specifications

Specyfikacje

Material
Stainless steel, heavy duty
Dimensions
11.375 W x 4.25 H x 6.1875 D in
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.