Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Growlink SI Pulse Module

Model / SKU: BMT-F-SI4 BACnet MS/TP

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Cena referencyjna źródłaPLN 978.12

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Product details

  • The BMT-F-SI4 carries four S0 inputs that meet DIN EN 62053-31 Class A.
  • BACnet MS/TP reports the rolling count back to the Growlink controller.
  • The software converts pulses to gallons per minute, then trims pump runtime to land the exact injection volume each dose calls for.
  • BACnet MS/TP S0 Input with Retentive Counters and 500 Hz Capture
  • Pulse capture runs at 50 Hz through the Accumulator object and 500 Hz through the PulseConverter object.
  • A high-pulse flow meter on a fast-cycling pump stays accurate.
  • Retentive memory holds the last counter reading through a power blip.
  • That matters when a recipe spans a UPS swap or breaker trip.
  • Address and bit rate set with two rotary switches on the front.
  • A new module drops onto an existing trunk without bringing the BACnet line up on a laptop.
  • 4 × S0 pulse inputs (DIN EN 62053-31 Class A): Plug any S0-output flow or energy meter into the module.
  • BACnet MS/TP over a single trunk: Reports counter values back to the Growlink controller and any other BACnet client without protocol gateways.
  • 50 Hz Accumulator / 500 Hz PulseConverter: Two BACnet objects cover slow utility meters and fast injection-pump feedback on the same module.
  • Retentive counter memory: Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
  • 2 front-panel rotary switches: Set BACnet address and bit rate without a laptop or DIP-switch acrobatics.
  • 24 V AC/DC supply with spring-clamp terminals: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: IEC 60715 rail snap-in keeps panels tidy alongside BMT-F-TO4, BMT-F-AOP4, or BMT-F-RTR.
  • Technical Specifications

Specyfikacje

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Retentive counter memory
Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.