Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Akcesoria oświetlenioweZapytanie hurtowe

Growlink HUB Connection Cable (3M)

Model / SKU: HUB-CON-3M

Wiring the Growlink HUB Connection Cable into Your LINKS System

HUB Power Budget
Within 1A shared across 8 ports
Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
Cena referencyjna źródłaPLN 39.88

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Wiring the Growlink HUB Connection Cable into Your LINKS System

Product details

  • The Growlink HUB Connection Cable runs a 3-meter (9 ft 10 in) line between any compatible LINKS device and the LINKS 8-Port Device HUB.
  • It uses 8-conductor RJ-45 straight-through wiring terminated on standard RJ-45 jacks at both ends.
  • The single cable carries 24VDC power and Modbus data together.
  • That keeps each device on one port instead of pulling power and signal on separate runs.
  • The wiring matches what the HUB documentation calls out for every port, so any 8-conductor RJ-45 cable to that spec drops in.
  • Planning Runs with a 3m LINKS Device RJ-45 Cable
  • At 3 meters, the run covers most layouts where the HUB sits just outside a flower room.
  • The device end can land on a canopy frame, controller wall, or substrate tray inside the space.
  • Growers running the 8-Port Device HUB usually allocate one cable per LINK device port.
  • The canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, and Batch TankLINK family all use this same connector.
  • Each draws within the HUB's 1A power budget.
  • If a sensor lands farther out, this Growlink HUB accessory pairs with another drop to bridge the gap.
  • A single LINKS automation cable rarely reaches a far-corner device on its own in larger rooms.
  • 3-Meter Length: Spans 9 ft 10 in from HUB port to device — long enough for most room-to-canopy runs.
  • RJ-45 Straight-Through Wiring: Eight-conductor pinout matches every Growlink LINK device port and the HUB's documented spec.
  • Power + Data on One Line: Delivers 24VDC and Modbus signal so each LINK draws everything from a single port.
  • HUB-Native Connector: Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
  • Cultivation-Environment Build: Jacketing holds up to the temperature swings and humidity typical inside flower and veg rooms.
  • Technical Specifications

Specyfikacje

Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
HUB Power Budget
Within 1A shared across 8 ports
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
HUB-Native Connector
Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.