Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Growlink Canopy LINK

Model / SKU: GL-LINK-CANOPY

What the Growlink canopyLINK Consolidates in a Room

Input Power
24VDC, 5W
Low Power Draw
24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
Sensor Inputs
8x M8 ports with auto-addressing
Dimensions
7.75 x 7.75 x 3.75 in
Cena referencyjna źródłaPLN 1,193.71

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

What the Growlink canopyLINK Consolidates in a Room

Product details

  • Sensor sprawl is the quiet cost of instrumenting a grow.
  • Every probe wants a channel and every channel wants a port.
  • A controller runs out of inputs long before a room runs out of things worth measuring.
  • This node answers that by taking eight sensors onto a single device.
  • Each one lands on its own M8 port, and addressing happens automatically, so swapping or adding a probe never means configuring a channel by hand.
  • Power is 24VDC at 5W from the included supply, which is a small enough load to run alongside everything else on a bench.
  • Operating range covers 50 to 122 degrees Fahrenheit and up to 75 percent relative humidity, non-condensing.
  • The housing is water resistant, which suits a greenhouse or an indoor room without adding a separate enclosure.
  • Connection to a Growlink HUB runs over the supplied ten-foot RJ-45 cable, or the unit joins over Wi-Fi for a hub-free install.
  • Mixing Probes on a Substrate Sensor Hub
  • Sensor types mix freely across the eight ports.
  • TerraLINK probes read root-zone water content, EC and temperature straight out of the slab or pot.
  • ClimaLINK sensors cover air temperature, humidity and vapour pressure deficit.
  • A PAR sensor on another port captures canopy light intensity for the same node.
  • Third-party instruments speaking SDI-12 land on those same M8 ports, which keeps existing greenhouse hardware in service rather than forcing a wholesale swap.
  • Mount the node close enough to the canopy that no cable ends up under tension.
  • Because addressing is automatic, plug position does not matter and neither does the sequence of installation.
  • Inside Growlink OS the whole assembly registers as one device, which frees regular HUB ports for actuators such as valveLINK and quadLINK.
  • One limit is worth stating plainly.
  • This node reads, it does not switch.
  • Every output decision still runs through Growlink OS or Copilot rules on the wider platform.
  • Eight Auto-Addressing M8 Ports: Substrate, climate and light sensors share any port, with channel assignment handled by the hub.
  • Growlink and SDI-12 Compatible: TerraLINK and ClimaLINK run natively, and compatible third-party SDI-12 instruments work without firmware changes.
  • Wi-Fi or Wired: Pair over Wi-Fi for a hub-free install, or plug into a Growlink HUB with the ten-foot RJ-45 cable.
  • One Device in Growlink OS: The node registers once, which leaves regular HUB ports free for actuators like valveLINK and quadLINK.
  • Water-Resistant Housing: Greenhouse and indoor cultivation conditions are handled without a separate protective enclosure.
  • Low Power Draw: 24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
  • Made in the USA: Domestic manufacture with a mounting kit and power supply included in the box.

Specyfikacje

Input Power
24VDC, 5W
Sensor Inputs
8x M8 ports with auto-addressing
Sensor Compatibility
Growlink TerraLINK / ClimaLINK plus SDI-12
Connectivity
Wi-Fi standalone or RJ-45 to a Growlink HUB
Operating Temperature
50-122 F (10-50 C)
Operating Humidity
0-75% RH, non-condensing
Dimensions
7.75 x 7.75 x 3.75 in
OS Footprint
Registers as a single device in Growlink OS
Low Power Draw
24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.