Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Kontrolery i miernikiZapytanie hurtowe

Growlink Batch TankLINK pH Sensor

Model / SKU: GL-LINK-PHSENSOR

Reading Acidity with the Growlink Batch TankLINK pH Sensor

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Cena referencyjna źródłaPLN 319.35

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Reading Acidity with the Growlink Batch TankLINK pH Sensor

Product details

  • The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time.
  • The probe covers the full 0–14 pH range at ±0.02 pH accuracy with 0.01 pH resolution.
  • A 10-foot cable runs from the sensor to the Batch TankLINK controller.
  • The cable terminates on a BNC connector that pushes onto the controller port.
  • A quarter-turn clockwise locks it in place.
  • Inside the typical hydroponic feed window of 5.5–6.5 pH, that accuracy is tight enough to confirm a fresh batch lands inside spec on the first mix.
  • Calibrating and Maintaining the TankLINK pH Probe
  • Calibration is a two-point process with pH 7.00 and pH 4.01 buffer solutions.
  • The TankLINK LCD wizard walks the probe through each buffer in turn and locks the cal at a stable voltage.
  • Run cal at the start of each batch or whenever the reading drifts past ±0.05 pH between known mixes.
  • The pH probe ships in a storage cap of pH 4 buffer and potassium chloride.
  • The membrane needs to stay wet between runs.
  • A dry membrane is the fastest way to kill a pH probe early.
  • Keep the storage cap on whenever the sensor sits out of solution.
  • Plug-and-play wiring keeps a single-probe swap during teardown under a minute.
  • The nutrient tank pH probe twists out of the BNC port and a fresh one twists in.
  • 0–14 pH Range: Full-scale read covers anything a hydro feed will ever hit, including post-dosing spikes.
  • ±0.02 pH Accuracy: Tight enough to confirm fresh mixes land in the 5.5–6.5 feed window on the first measurement.
  • 0.01 pH Resolution: Catches small drifts between feeds before they show up as canopy stress symptoms.
  • BNC Connector with 1/4-Turn Lock: Push-on, twist-lock fit on the TankLINK controller's labeled port — no rewiring at swap.
  • Two-Point Calibration: pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.
  • Technical Specifications

Specyfikacje

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Compatible Controller
Growlink Batch TankLINK
Two-Point Calibration
pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.