Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Growlink 4 Triac Out Module

Model / SKU: BMT-F-TO4 BACnet MS/TP

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Supply voltage
24 V AC/DC
Outputs
4 × solid-state triac
Mounting
TH35 DIN rail (IEC 60715)
Cena referencyjna źródłaPLN 978.12

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Product details

  • The BMT-F-TO4 carries four solid-state triac outputs rated 0.8 A each at 24 V AC/DC.
  • Where a DO-4 relay would burn out chasing the rapid pulses an HE Anderson injection pump asks for, the triac switches stay clean.
  • The pump fires rhythmically at the injection rate the dosing recipe calls for, and BACnet MS/TP carries the setpoints from the Growlink controller.
  • BACnet MS/TP Triac Module with Manual Override on Every Channel
  • Each output gets a three-position black toggle.
  • Setting A lets Growlink software command the channel.
  • Setting 1 forces the triac on.
  • Setting 0 locks it off.
  • The module clips to a TH35 DIN rail and lands the BACnet line on spring-clamp terminals, so commissioning takes minutes per panel.
  • Wire it next to a BMT-F-DI4 or BMT-F-AOP4 for a full BACnet I/O stack on the same trunk.
  • 4 triac outputs at 0.8 A: Solid-state switching for fast-cycling AC loads like HE Anderson dosing pumps and small solenoid valves.
  • BACnet MS/TP communication: Plugs into the Growlink controller and any other BACnet trunk without protocol gateways.
  • Manual A/1/0 toggle per channel: Switch from software control to forced on or forced off without rewiring the panel.
  • 24 V AC/DC supply: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: Spring-clamp terminals snap into IEC 60715 rail for clean panel build-outs.
  • No mechanical relays to wear out: Triac switching handles the rapid pulse trains a relay would burn out on inside a season.
  • Stackable with BMT-F-DI4 / BMT-F-AOP4 / BMT-F-RTR: Build a full BACnet MS/TP I/O bank on one trunk with the Metz Connect family.
  • Technical Specifications

Specyfikacje

Outputs
4 × solid-state triac
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.