Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Chikamasa Scissors TP-500SF

Model / SKU: 801660

Chikamasa TP-500SF: Straight Coated Blade on a Soft Spring

Model
TP-500SF
Blade shape
Straight
Blade length
35 mm (1.4 in)
Overall length
155 mm (6.1 in)
Cena referencyjna źródłaPLN 98.85

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Chikamasa TP-500SF: Straight Coated Blade on a Soft Spring

Product details

  • Bulk work is what this pair was put together for.
  • A straight blade of heat-treated Japanese stainless does the cutting, finished with a high-quality fluorine coating.
  • That coating sheds resin and sap, so the edge keeps sliding through sticky material instead of dragging.
  • Between the handles, a flexible stainless torsion spring reopens the blades after each squeeze.
  • The blade runs 35 mm, and the whole pair measures 155 mm.
  • Chikamasa grinds the outer faces round, so the blade back will not bruise the flower it brushes.
  • Grips are elastomer resin moulded over a steel core, soft on the skin and firm under pressure.
  • A safety band holds the pair closed in a pocket or drawer and flicks off with the thumb.
  • Together they make the TP-500 built for volume.
  • Japanese Trimming Scissors for High-Volume Wet Trim
  • Wet trim straight off the branch is the hardest test for any scissor.
  • Resin is fresh and tacky, fan leaves are everywhere, and a crew may be at the table for hours.
  • The coating keeps cleaning stops further apart, while the spring saves the small muscles that open the hand.
  • A straight edge strips leaves, cuts stems to hanging length and squares off bud bases quickly.
  • Detail work is its weak spot.
  • A straight tip does not reach into tight crevices as easily as a curved or slanted blade.
  • Many trimmers pair it with a slanted B-500SLF for the final pass.
  • Resin still builds up eventually, so wipe the blade with isopropyl and a soft rag rather than an abrasive pad.
  • The spring takes a little getting used to, and trimmers who prefer a springless feel can use the B-500SF instead.
  • Keep it on leaf and soft stems, since woody branches chip the edge and scuff the coating.
  • Straight Japanese Stainless Blade: A straight edge moves quickly through fan leaves, stem cuts and bud bases during bulk trim.
  • Fluorine Sap-Resistant Coating: Resin and sap slide off the coated blade, so cleaning stops come further apart.
  • Soft Torsion Spring: A flexible stainless spring reopens the blades after each cut and eases hand fatigue.
  • Steel-Core Grip and Safety Band: Soft elastomer grips over a steel core, with a band that locks the pair shut for storage.
  • Technical Specifications

Specyfikacje

Model
TP-500SF
Blade shape
Straight
Blade length
35 mm (1.4 in)
Overall length
155 mm (6.1 in)
Fluorine Sap-Resistant Coating
Resin and sap slide off the coated blade, so cleaning stops come further apart.

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.