Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

4 inch Backdraft Damper

Model / SKU: VTBDD4

What a 4 inch Backdraft Damper Is Stopping

Duct size
Four inches, matching a four inch inline fan or run
Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Cena referencyjna źródłaPLN 95.74

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

What a 4 inch Backdraft Damper Is Stopping

Product details

  • A duct with nothing in it is a two way street.
  • When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
  • On a sealed room it also breaks the pressure relationship you built the extraction around.
  • A backdraft damper closes that street in one direction.
  • Two blades sit inside the body, each on its own independent hinge.
  • That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
  • The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
  • It installs in any orientation.
  • The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
  • Why Static Pressure Decides Whether It Opens at All
  • One figure matters more on a small duct than anywhere else.
  • The blades need between four and eight hundredths of an inch of static pressure before they lift.
  • That is not very much pressure at all.
  • A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
  • The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
  • Two habits between them avoid it entirely.
  • Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
  • Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
  • A unit that will be run at thirty percent overnight needs to open at thirty percent.
  • The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
  • Duct size: Four inches, matching a four inch inline fan or run
  • Function: Stops air travelling back down the duct when the fan is off
  • Blades: Two, each on an independent hinge so neither can jam the other
  • Seal: A neoprene perimeter gasket rather than metal onto metal
  • Noise: That gasket is what makes the closure quiet as well as tight
  • Body: Galvanized steel throughout the housing and both blades
  • Mounting: The whole assembly inserts into the duct, with no flange to fit
  • Orientation: Installs in any position

Specyfikacje

Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Four inches, matching a four inch inline fan or run
Noise
That gasket is what makes the closure quiet as well as tight

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.