Jaśniejszy sposób na rozwój. Sprzedaż hurtowa bezpośrednio z fabryki. Ponad 15 lat rosnącego doświadczenia

Ta treść jest obecnie dostępna w oryginalnym języku.

Wentylacja i klimatZapytanie hurtowe

12 inch Backdraft Damper

Model / SKU: VTBDD12

Sizing a 12 inch Backdraft Damper Into a Big Run

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Cena referencyjna źródłaPLN 206.32

Tylko do celów porównawczych. Zapytaj o aktualną cenę hurtową, dostępność i warunki dostawy.

Brak opłat. Rozmowa o tym, czego potrzebujesz.

Wsparcie bezpośrednio od producentaPonad 15 lat doświadczenia
BLIŻSZE SPOJRZENIE

Trochę więcej o tym produkcie

Sizing a 12 inch Backdraft Damper Into a Big Run

Product details

  • At twelve inches everything about a damper is bigger, including the consequences of getting it wrong.
  • An open duct this size is a substantial hole in a building.
  • With the fan off it moves cold air, odour and dust in the wrong direction continuously.
  • On a room built around a pressure relationship, that undoes the whole design.
  • The two blades here are correspondingly large plates, which is why the hinge arrangement matters.
  • Each blade has its own hinge, so a blade that catches on debris does not hold its partner open with it.
  • Galvanized steel keeps plates this size rigid enough to seat properly for years in a humid duct.
  • A neoprene perimeter gasket takes the closure.
  • On a plate this size that is the difference between a soft thud and a bang carrying through a building.
  • Installing a Duct Insert of This Diameter
  • The assembly pushes into the duct rather than mounting on a flange, which at this diameter saves genuine work.
  • There is no transition piece to fabricate and nothing to line up beyond the duct itself.
  • It installs in any orientation.
  • Two things deserve attention at this size.
  • Support the duct on both sides of the damper properly.
  • A twelve inch run carries real weight, and a sagging duct distorts the housing until the blades no longer seat.
  • The second is access to it afterwards.
  • A damper buried in a ceiling void where nobody can reach it will eventually stop sealing and nobody will know.
  • Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
  • A correctly specified twelve inch fan clears that easily at speed.
  • Confirm it at low speed too.
  • Check the swing and wipe the sealing face at every filter service.
  • Why it matters: An open duct this size is a substantial hole in a building
  • Blades: Two large plates, each on its own independent hinge
  • Hinge design: A blade that catches cannot hold its partner open
  • Body: Galvanized steel, stiff enough to keep large plates seating
  • Seal: Neoprene perimeter gasket, which softens the closure
  • Mounting: Inserts into the duct, with no transition piece to fabricate

Specyfikacje

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Support
Hold the duct both sides so the housing cannot distort

Sprawmy, żeby to zadziałało w Twoim projekcie

W zapytaniu ofertowym prosimy o podanie ilości, miejsca dostawy, obszaru uprawy oraz wszelkich wymagań dotyczących napięcia lub wtyczki. Specyfikacja, dostępność, warunki wysyłki i gwarancji zostaną potwierdzone w pisemnej ofercie.

Przeliczenie referencyjne przy użyciu zapisanego kursu wymiany z dnia 15 lis 2026. Przeliczone kwoty nie stanowią oferty handlowej.

ROŚNIJMY RAZEM

Pytania i dyskusja

0

Masz pytanie lub chcesz się czymś podzielić? Rozpocznij rozmowę.

KONTYNUUJ ODKRYWANIE

Więcej możliwości dla Twojej przestrzeni

Zobacz wszystkie produkty
POCZĄTEK CZEGOŚ DOBREGO

Rzućmy światło na Twój projekt.

Powiedz nam trochę o swoich potrzebach. Wykorzystamy Twoje dane, aby przygotować odpowiednią odpowiedź hurtową.

Twoja lista produktów

Bez opłat. Bez zobowiązań. Tylko pomocna rozmowa.