Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.
VerlichtingsaccessoiresGroothandelsaanvraag
Sero Bus Cable, 50 ft
Model / SKU: 705165
Sero 50 ft Bus Cable for Long Facility Runs
- Type
- System bus cable
- Length
- 50 ft
- Compatibility
- Sero System
ReferentieprijsEUR 35.84
Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.
Geen betaling vereist. Een gesprek over uw behoeften.
Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK
Nog wat meer informatie over dit product.
Sero 50 ft Bus Cable for Long Facility Runs
Product details
- Big rooms and multi-room facilities stretch a control network over long distances.
- A remote component may sit at the far end of a building wing from the controller.
- This Sero cable covers runs like that at 50 feet.
- It carries the system bus in one continuous length.
- That removes the need to chain shorter cables together.
- Every join avoided is one less connection to check and maintain.
- Sero states that only its approved bus cables should connect system components.
- A matched cable keeps the network within what the system was designed for.
- Each cable links one component to one other.
- Survey the full route before installing, including wall crossings and ceiling climbs.
- Long routes along walls and ceilings often add more length than expected.
- Planning Long Runs of Bus Cables
- Power the system down before connecting or removing any bus cable.
- Walk the route first and mark every support point and wall crossing.
- Hang the cable from hooks or a tray so it never lies on the floor.
- Space supports evenly so the run does not sag between them.
- Keep clear of lights, heaters, hot ducting and moving equipment.
- Run parallel to power wiring only where unavoidable, and keep a gap between them.
- Sleeve the cable wherever it passes through a wall, then seal the opening.
- Leave slack loops at both ends so the connectors carry no strain.
- Label each end with its room and component.
- Restore power and confirm the controller recognizes the remote unit.
- Inspect the whole run on a regular schedule for sagging, chafing or damage.
- 50 ft Length: Covers long facility runs.
- One Continuous Cable: No chained joins.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Remote Components: Reaches separate spaces.
Specificaties
- Type
- System bus cable
- Length
- 50 ft
- Compatibility
- Sero System
Laten we ervoor zorgen dat het lukt voor jouw project.
Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.
Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.
BLIJF ONTDEKKEN
Bekijk alle productenMeer mogelijkheden voor uw ruimte
Verlichtingsaccessoires
Yield Lab Professional Series Double Ended Grow Light Reflector
BronvermeldingEUR 58.83
Verlichtingsaccessoires
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
BronvermeldingEUR 270.89
Verlichtingsaccessoires
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
BronvermeldingEUR 135.85
Vragen en discussie
Heb je een vraag of iets nuttigs te delen? Start het gesprek.