Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.
VerlichtingsaccessoiresGroothandelsaanvraag
Sero Bus Cable, 20 ft
Model / SKU: 705155
Sero 20 ft Bus Cable for Full-Room Runs
- Type
- System bus cable
- Length
- 20 ft
- Compatibility
- Sero System
ReferentieprijsEUR 19.09
Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.
Geen betaling vereist. Een gesprek over uw behoeften.
Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK
Nog wat meer informatie over dit product.
Sero 20 ft Bus Cable for Full-Room Runs
Product details
- Larger rooms spread their equipment out, and the control network has to follow.
- A component on the far wall may sit well away from the controller.
- This Sero cable covers that span at 20 feet.
- It links one component to the next across the room in a single run.
- That avoids joining shorter cables together along the way.
- Fewer joins mean fewer connections to check and fewer places for trouble.
- Sero states that only its approved bus cables should connect system components.
- Using the matched cable keeps the network within the system design.
- Each cable connects one pair of units.
- Measure along the actual route, including climbs over doorways and drops to equipment.
- Route plans that hug walls or ceilings usually need more length than a straight line suggests.
- Running Bus Wire Overhead or Along Walls
- Power down the system before connecting or removing a bus cable.
- Plan the route overhead or along walls so it never crosses the floor.
- Use ceiling hangers, J-hooks or wall clips spaced evenly along the run.
- Avoid pulling the cable tight between supports.
- Leave a slack loop near each connector so the plug carries no strain.
- Stay clear of lights, ballasts, heaters and hot ducting.
- Cross power lines at right angles where the paths meet.
- Sleeve the cable in conduit where it passes through a wall or near moving equipment.
- Label both ends to match the components they serve.
- Restore power and check that every unit appears on the controller.
- Inspect the full run during maintenance for sagging, chafing or loose supports.
- 20 ft Length: Spans a full grow room.
- Single Run: No joins along the way.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Overhead Friendly: Hangs from hooks or wall clips.
Specificaties
- Type
- System bus cable
- Length
- 20 ft
- Compatibility
- Sero System
Laten we ervoor zorgen dat het lukt voor jouw project.
Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.
Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.
BLIJF ONTDEKKEN
Bekijk alle productenMeer mogelijkheden voor uw ruimte
Verlichtingsaccessoires
Yield Lab Professional Series Double Ended Grow Light Reflector
BronvermeldingEUR 58.83
Verlichtingsaccessoires
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
BronvermeldingEUR 270.89
Verlichtingsaccessoires
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
BronvermeldingEUR 135.85
Vragen en discussie
Heb je een vraag of iets nuttigs te delen? Start het gesprek.