Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Ventilatie en klimaatGroothandelsaanvraag

Ruck 4 Back Draught Dampner

Model / SKU: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
ReferentieprijsEUR 16.31

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Specificaties

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.