Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Ventilatie en klimaatGroothandelsaanvraag

Quest Duct Kit (Hi-E 195)

Model / SKU: 4039132

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
ReferentieprijsEUR 167.61

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Product details

  • This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
  • A duct cover plate blocks off the opening the ducted setup no longer uses.
  • Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
  • Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
  • The installation sheet for the kit is TS-1059, written for the Hi-E series.
  • The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
  • Nothing else is needed from the dehumidifier side.
  • Flex or rigid duct in matching sizes completes the run.
  • Why Growers Fit a Dehumidifier Duct Kit
  • A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
  • That keeps its heat and noise out of the room and frees floor space for plants.
  • Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
  • Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
  • Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
  • Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
  • Plan the drain line at the same time, since a remote unit still needs a path for condensate.
  • The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
  • 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
  • Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
  • Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
  • Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
  • Technical Specifications

Specificaties

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.