Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Ventilatie en klimaatGroothandelsaanvraag

Quest 335 Duct Kit

Model / SKU: 4042685

What the Quest 335 Duct Kit Includes

Duct diameter
16 in
Compatible models
Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
Remote mounting
Run the unit from a mechanical room or ceiling.
ReferentieprijsEUR 385.04

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

What the Quest 335 Duct Kit Includes

Product details

  • This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
  • In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
  • Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
  • Both connections take 16 in round duct.
  • Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
  • It also fits the 50 Hz Quest 375 (4046200-NC).
  • The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
  • That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
  • Planning a Run With a Dehumidifier Duct Kit
  • A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
  • Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
  • Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
  • Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
  • Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
  • Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
  • Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
  • Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
  • Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
  • 16 in connections: Round duct on both intake and discharge.
  • Complete hardware: Adapters, plenum, screws and drill bit included.
  • Factory fit: Quest part 4042685 for the Quest 335 cabinet.
  • Remote mounting: Run the unit from a mechanical room or ceiling.
  • Technical Specifications

Specificaties

Duct diameter
16 in
Compatible models
Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
Remote mounting
Run the unit from a mechanical room or ceiling.

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.